KAI-11002
4008 (H) x 2672 (V) Interline
CCD Image Sensor
Description
The KAI−11002 Image Sensor is a high-performance 11-million
pixel sensor designed for professional digital still camera applications.
The 9.0 mm square pixels with microlenses provide high sensitivity
and the large full well capacity results in high dynamic range. The two
high-speed outputs and binning capabilities allow for 1−3 frames per
second (fps) video rate for the progressively scanned images.
The vertical overflow drain structure provides anti-blooming
protection and enables electronic shuttering for precise exposure
control. Other features include low dark current, negligible lag and
low smear.
www.onsemi.com
Table 1. GENERAL SPECIFICATIONS
Parameter
Architecture
Typical Value
Interline CCD, Progressive Scan
4072 (H) × 2720 (V) = 11.1 M
4033 (H) × 2688 (V) = 10.8 M
4008 (H) × 2672 (V) = 10.7 M
1 or 2
Total Number of Pixels
Number of Effective Pixels
Number of Active Pixels
Number of Outputs
Pixel Size
Figure 1. KAI−11002 Interline CCD
Image Sensor
Features
9.0 mm (H) × 9.0 mm (V)
• High Resolution
Active Image Size
37.25 mm (H) × 25.70 mm (V),
43.3 mm (Diagonal),
35 mm Optical Format
• High Sensitivity
• High Dynamic Range
• Low Noise Architecture
• High Frame Rate
• Binning Capability for Higher Frame Rate
• Electronic Shutter
Aspect Ratio
3:2
−
Saturation Signal
60,000 e
Quantum Efficiency
KAI−11002−ABA
KAI−11002−CBA (RGB)
KAI−11002−FBA (RGB)
50%
32%, 34%, 40%
35%, 38%, 40%
Applications
−
Output Sensitivity
Total Noise
13 mV/e
−
• Industrial Inspection
• Aerial Photography
30 e
Dark Current
< 50 mV/s
Dark Current Doubling
Temperature
7°C
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
Dynamic Range
Charge Transfer Efficiency
Blooming Suppression
Smear
66 dB
> 0.99999
> 1000X
< −80 dB
−
Image Lag
< 10 e
Maximum Data Rate
Package
28 MHz
40-pin, CERDIP, 0.070″ Pin Spacing
AR Coated or Clear Glass
Cover Glass
NOTE: All Parameters are specified at T = 40°C unless otherwise noted.
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
February, 2016 − Rev. 5
KAI−11002/D