LM111JAN
www.ti.com
SNOSAM9B –JULY 2008–REVISED MARCH 2013
LM111JAN Voltage Comparator
Check for Samples: LM111JAN
1
FEATURES
DESCRIPTION
The LM111 is a voltage comparator that has input
currents nearly a thousand times lower than devices
such as the LM106 or LM710. It is also designed to
operate over a wider range of supply voltages: from
standard ±15V op amp supplies down to the single
5V supply used for IC logic. The output is compatible
with RTL, DTL and TTL as well as MOS circuits.
Further, it can drive lamps or relays, switching
voltages up to 50V at currents as high as 50 mA.
2
•
•
•
•
•
•
•
•
Operates from Single 5V Supply
Input Current: 200 nA max. Over Temperature
Offset Current: 20 nA max. Over Temperature
Differential Input Voltage Range: ±30V
Power Consumption: 135 mW at ±15V
Power Supply Voltage, single 5V to ±15V
Offset Voltage Null Capability
Strobe Capability
Both the inputs and the outputs of the LM111 can be
isolated from system ground, and the output can
drive loads referred to ground, the positive supply or
the negative supply. Offset balancing and strobe
capability are provided and outputs can be wire
OR'ed. Although slower than the LM106 and LM710
(200 ns response time vs 40 ns) the device is also
much less prone to spurious oscillations. The LM111
has the same pin configuration as the LM106 and
LM710.
Connection Diagrams
Note: Pin 4 connected to case
Figure 1. Metal Can Package
Top View
See Package Number LMC0008C
Figure 2. Dual-In-Line Package
Top View
See Package Number NAB0008A
Figure 3. Dual-In-Line Package
Top View
See Package Number J0014A
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated