J-Type
Voltage Controlled Crystal Oscillator
Product is compliant to RoHS directive
and fully compatible with lead free assembly
Features
• Output Frequencies from 1.024 MHz to 170.000 MHz
• +3.3 or +5.0 volt options
• Small 14mm x 9mm J-type Package
• CMOS or PECL Outputs
• Low phase noise and custom options
• 0/70° C or –40/85° C operating temperature
• Tri-State output (CMOS) Enable/Disable (PECL)
Applications
• Clock Smoothing
The J-type Voltage Controlled Crystal Oscillator
• Frequency Translation
• SONET, SDH, ATM, DSLAM, ADM
Description
The J-type voltage controlled crystal oscillator
expands VI’s advanced VCXO performance
capabilities while adhering to a package footprint
compatible with the industry-common J-lead package.
The J-type VCXO is a quartz stabilized square wave
generator with either a CMOS output for driving
CMOS/TTL loads or a PECL output. The device is
packaged in a 6 pin J-lead ceramic package and is
hermetically sealed with a grounded conductive lid.
Table of Contents
Page 2- 6 -- CMOS
Page 7- 11 -- PECL
The first section of this data sheet covers the
performance/packaging/tape and reel/ordering
information for the CMOS version and then the
information for the PECL option follows.
Vectron International 267 Lowell Rd. Hudson, NH 03051
Tel:1-88-VECTRON-1
e-mail: vectron@vectron.com