VDE
JC
COMPACT POWER RELAYS
FEATURES
JC RELAYS
30.0
1.181
19.0
.748
• High inrush current capability
1 Form A: 163 A inrush (TV-8)
30.0
1.181
19.0
.748
2 Form A: 111 A inrush (TV-5)
30.4
1.197
• High dielectric withstanding for transient protection:
JC can withstand 10,000 V surge in µs between coil and
contact.
32.4
1.276
• Electrical life:
1 Form A: 105 ope. at 15 A 250 V AC resistive load
2 Form A: 105 ope.
PC board type
at 10 A 250 V AC resistive load
• UL/CSA, VDE,TÜV, SEMKO also approved.
Plug-in type
19.0
.748
COMMENTS ABOUT Cd FREE
We have introduced Cadmium free type products to reduce the
material which is not good for our environment. (The suffix “F”
should be added to the part number.) If you are still using
Cadmium containing parts, which don’t have “F” on the suffix of
the part number, please use Cadmium free parts from now on.
The life of the Cadmium free parts may be shorter than the
Cadmium containing parts based on the load condition, so
please evaluate the Cadmium free parts with your actual
application before use.
32.9
1.295
45.0
1.772
mm inch
TM type
RoHS Directive compatibility information
http://www.nais-e.com/
SPECIFICATIONS
Contact
Characteristics
Arrangement
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Contact material
Contact force, min.
1 Form A
2 Form A
Maximum operating speed
Initial insulation resistance*1
20 cpm.
Min. 100 MΩ at 500 V DC
2,000 V rms for 1 min.
2,000 Vrms for 1 min.
30 mΩ
Between open contacts
AgSnO2 type
30 g
3,750 VA
250 V AC
15 A
Initial
Between contacts sets
breakdown
voltage*2
Between contacts and
coil
Maximum switching power
2,500 VA
250 V AC
10 A
4,000 Vrms for 1 min.
Max. 30 ms
Rating
(resistive
load)
Maximum switching voltage
Max. switching current
Min. switching capacity#1
Mechanical
10 A 250 V AC
Electrical
(resistive)
Operate time*3
(at nominal voltage)
Release time(without diode)*3
(at nominal voltage)
100 mA, 5 V DC
5×106
105
—
Max. 10 ms
Expected
life (min.
operation)
—
105
Temperature rise
(at nominal voltage)
Max. 55°C
5A 250 V AC
Functional*4
Destructive*5
resistance
196 m/s2 {20 G}
980 m/s2 {100 G}
Coil
Shock
Nominal operating power
900 mW
1,000 mW
98 m/s2 {10 G}, 10 to 55 Hz
at double amplitude of 1.6 mm
117.6 m/s2 {12 G}, 10 to 55 Hz
at double amplitude of 2 mm
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
Functional*6
Vibration
resistance
Remarks
Destructive
* Specifications will vary with foreign standards certification ratings.
*1 Measurement of same location as “Initial breakdown voltage” section
*2 Detection current: 10mA
Conditions for operation,
transport and storage*7
(Not freezing and condens-
ing at low temperature)
Ambient
temp.
–50°C to +60°C
–58°F to +140°F
*3 Excluding contact bounce time
*4 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*5 Half-wave pulse of sine wave: 6ms
Humidity
5 to 85%R.H.
*6 Detection time: 10µs
Unit weight
Approx. 31 g 1.09 oz
*7 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.