1N4460 thru 1N4496
1N6485 thru 1N6491
VOIDLESS-HERMETICALLY-SEALED 1.5
WATT GLASS ZENER DIODES
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/406
and is ideal for high-reliability applications where a failure cannot be tolerated.
These industry-recognized 1.5 Watt Zener Voltage Regulators are hermetically
sealed with voidless-glass construction using an internal metallurgical bond. It
includes Zener selections from 3.3 to 200 volts in standard 5% tolerances as
well as tighter tolerances identified by different suffix letters on the part number.
They are also available in surface-mount packages (see separate data sheet
for 1N4460US thru 1N4496US and 1N6485US thru 1N6491US). Microsemi
also offers numerous other Zener products to meet higher and lower power
ratings in both thru-hole and surface mount packages.
“A” Package
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
•
•
•
Popular JEDEC registered series
Voidless hermetically sealed glass package
Extremely robust construction
Triple-layer passivation
Internal “Category I” Metallurgical bonds for 1N4462
thru 1N4496 and “Category III” for 1N6485 thru 1N6491
as well as 1N4460 and 1N4461.
•
Regulates voltage over a broad operating current
and temperature range
•
•
Extensive selection from 3.3 to 200 V
Standard voltage tolerances are plus/minus 5% with
no suffix
•
Tight tolerances available in plus or minus 2% or 1%
with C or D suffix respectively
Flexible axial-lead mounting terminals
•
•
•
•
•
JAN, JANTX, JANTXV, and JANS available per MIL-
PRF-19500/406
Nonsensitive to ESD per MIL-STD-750 Method 1020
Surface mount equivalents also available in a square
end-cap MELF configuration with a “US” suffix (see
separate data sheet for 1N4460US thru 1N4496US and
1N6485US thru 1N6491US)
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
•
•
Operating Temperature: -65oC to +175oC.
Storage Temperature: -65oC to +200oC.
Power Dissipation: 1.5 Watts @ TA = 25oC
•
CASE: Hermetically sealed voidless hard glass with
Tungsten slugs
•
TERMINATIONS: Axial-leads are Tin/Lead (Sn/Pb)
over Copper
MARKING: Body painted and part number, etc.
POLARITY: Cathode indicated by band
Tape & Reel option: Standard per EIA-296
Weight: 340 mg
Thermal Resistance: 42oC/W junction to lead at 3/8
inch (10 mm) from body
•
•
•
•
•
Thermal Impedance: 4.5oC/W (1N4462 thru 1N4496)
and 7.5oC/W (1N6485 thru 1N6491 as well as
1N4460 and 1N4461) at 10 ms
•
Forward Voltage: 1.00 V at 200 mA and 1.5 V at 1.0 A
ELECTRICAL CHARACTERISTICS @ 25oC
TYPE
NOMINAL
ZENER
MAXIMUM
DYNAMIC
MAXIMUM KNEE
IMPEDANCE
ZZK @ IZK
MAXIMUM
REVERSE
CURRENT
IR @ VR
MAXIMUM
CONTINUOUS
CURRENT
IZM
MAXIMUM
SURGE
TEST
VOLTAGE CURRENT IMPEDANCE
CURRENT
VZ
IZT
mA
ZZT @ IZT
OHMS
I
ZSM
µA
VOLTS
3.3
OHMS
400
400
400
400
500
500
600
mA
1.0
1.0
1.0
1.0
1.0
1.0
1.0
VOLTS
1.0
mA
433
397
366
332
304
280
255
AMPS
1N6485
1N6486
1N6487
1N6488
1N6489
1N6490
1N6491
76.0
69.0
64.0
58.0
53.0
49.0
45.0
10
10
9
50
50
4.2
3.6
1.0
3.9
3.9
35
1.0
3.6
4.3
9
5.0
4.0
1.0
0.5
1.0
3.3
4.7
8
1.0
3.0
5.1
7
1.0
2.7
5.6
5
2.0
2.5
Copyright 2004
Microsemi
Page 1
9-28-2004 REV A
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503