xppower.com
2 Watts
JAH Series
•
•
•
•
•
•
•
Low Cost
DIPꢀ24 Package
Operating Temperature ꢀ40 °C to +100 °C
Single & Dual Outputs
Optional Metal Case
Optional Isolation to 6000 VDC
3 Year Warranty
Specification
Input
General
Input Voltage Range
Input Current
• Nominal ±±10
• See table
• Pi network
Efficiency
Isolation
• See tables
• ±111 VDC input to output, for optional
high isolation versions up to 6111 VDC
input to output (see note ±)
Input Filter
Input Reverse Voltage • None
Protection
±111 VDC input to case
±111 VDC output to case
Undervoltage Lockout • None
Input Reflected Ripple • 35 mA pk-pk through ±2 µH inductor,
9
Isolation Resistance
Switching Frequency
• ±1 Ω
• 41 kHz typical singles,
311 kHz typical duals
5 Hz to 21 MHz
Input Surge
• 5 V models 7 VDC for ±11 ms
±2 V models ±5 VDC for ±11 ms
24 V models 28 VDC for ±11 ms
3
Power Density
MTBF
• 5ꢀ2± Wꢁin
• >3 MHrs to MIL-HDBK-2±7F at 25 /C, GB
Output
Environmental
Output Voltage
Minimum Load
• See table
• No minimum load required
• ±20 max
• 21 ms typical
• 21 ms typical
• ±1ꢀ50 max
Operating Temperature • -41 /C to +±11 /C, derate from ±110 load
at +85 /C to no load at +±11 /C
• +±11 /C max
Initial Set Accuracy
Start Up Delay
Case Temperature
Storage Temperature • -41 /C to +±25 /C
Humidity
Cooling
Start Up Rise Time
Line Regulation
Load Regulation
• Up to 910, non-condensing
• Natural convection
• ±1ꢀ50 max single & dual models
(±±ꢀ10 max for 3V3 versions) (see note 6)
Cross Regulation
• ±50 on dual output models (see note 4)
EMC & Safety
Transient Response
• ±30 max deviation (±50 for 3V3 output),
recovery to within ±0 in 2 ms for a 510
load change
Emissions
• EN55122 class A, conducted & radiated
with external components
(see Application Notes)
• EN6±111-4-2, level 3, Perf Criteria A
• EN6±111-4-4, level 3, Perf Criteria A
(see note 5)
• EN6±111-4-5, installation class 2,
Perf Criteria A (see note 5)
Ripple & Noise
• 75 mV pk-pk measured with
21 MHz bandwidth
ESD Immunity
EFT/Burst
Short Circuit Protection • Output shuts down with auto recovery
Maximum Capacitive
Load
• See tables
Surge
Temperature
Coefficient
• ±1ꢀ12ꢁ/C max
Conducted Immunity
Magnetic Fields
• EN6±111-4-6, ±1 Vrms, Perf Criteria A
• EN6±111-4-8, ± Aꢁm, Perf Criteria A