iW9801
RapidChargeTM AC/DC Primary-Side Digital ZVS Flyback Controller
1 Description
The iW9801 is a high-performance AC/DC primary-side digital flyback controller with advanced zero-voltage-switching
(ZVS) and adaptive multi-mode-control (MMC) working with secondary-side regulation (SSR) for applications requiring
high power density and high resolution in output voltage/current setting. The device can support rapid charge
applications such as travel adapters (TA) of 25W and above. It operates under multi-mode control (MMC) including
PWM, PFM and burst mode with main switch ZVS turn-on at high line voltage to achieve less switching loss and low
EMI. It also provides a number of key built-in protection features.
The iW9801 is optimized to work with Dialog’s secondary-side controller, the iW70x, for SSR, synchronous rectifier (SR)
control and USB PD 3.0 with PPS protocol support. The iW9801/iW70x chipset can achieve tight multi-level constant
voltage (CV) and multi-level constant current (CC) regulation in very fine steps for rapid charge applications. With SSR
digital compensation, the chipset eliminates the need for external loop compensation components while maintaining
stability under all operating conditions.
The iW9801 and iW70x chipset can support USB PD 3.0 with PPS to achieve fast and smooth CV/CC transitions upon
request by mobile devices (MD). The iW9801 and iW70x chipset can meet no-load power consumption of less than
20mW for a typical 25W to 45W design when the output USB cable is detached.
Dialog’s innovative proprietary technology ensures that power supplies designed with the iW9801 and iW70x chipset can
achieve high efficiency, high accuracy voltage/current control and fast dynamic load response.
2 Features
● Built-in single-point fault protections against AC line
voltage brown-out, output short-circuit, output over-
voltage, and optocoupler failure
● Supports USB PD travel adapter (TA) applications of
35W and above
● Supports constant-voltage (CV) and constant-current
(CC) regulation in fine steps by secondary-side
regulation (SSR)
● Optional user programable internal over-temperature
protection (OTP) threshold for various thermal
requirement
● Dialog’s patented adaptive ZVS control enables high
efficiency and low EMI
● < 20mW no load standby power for typical 25W to
45W designs at 230VAC when output USB cable is
detached
● User configurable ZVS timing to optimize performance
for different power devices
● AC unplug detection and X-capacitor discharge
● Adaptive multi-mode control (MMC) using PWM/
PFM/Burst modes based on input voltage and output
voltage/current improves efficiency and eliminates
audible noise
control
● 10-lead SOIC package
3 Applications
● Rapid-charging AC/DC adapters for smart phones,
tablets and other portable devices
Product Summary
Rev. 1.5
16-Nov-2022
1 of 7
www.renesas.com
© 2022 Renesas Electronics