C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
Features/Benefits
• Long travel
Typical Applications
A
• Instrumentation
• Available with LED
• Long life contact design
• Computers and peripherals
• Telecommunications and
networking equipment
• Epoxy terminial seal
compatabile with bottom
wash cleaning
• RoHS compliant models
available
Models Available
Specifications
Materials
CONTACT RATING: Q contact material: 6 AMPS @ 120 V AC
or 28 V DC; 3 AMPS @ 250 V AC. See page A-57 for
additional ratings.
CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP),
flame retardant (UL 94V-0).
PLUNGER: S, S1, S2 Options: Glass filled nylon or glass filled
polyester (PBT) (UL 94V-0). L, L1 Options: Brass, nickel plated.
ELECTRICAL LIFE: 50,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 20 mΩ typ. initial @
CAP & FRAME: Nylon, black standard.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
2-4 V DC, 100 mA, for both silver and gold plated contacts.
9
INSULATION RESISTANCE: 10 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 65ºC
SWITCH SUPPORT: Brass or steel, matte-tin plated.
END CONTACTS: Q contact material: Coin silver, silver plated.
See page A-57 for additional contact materials.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
CENTER CONTACT & ALL TERMINALS: Q contact material: Copper
alloy, silver plated. See page A-57 for additional contact materials.
CAP INSTALLATION FORCE: 10 lbs. maximum permissible.
TERMINAL SEAL: Epoxy. Refer to soldering and cleaning
in Technical Data Chapter.
NOTE: Any models supplied with P, R, S, Q, B or G contact material are RoHS compliant.
For the latest information regarding RoHS compliance,
please go to: www.ittcannon.com/rohs.
HARDWARE: Nut & Locking Ring: Brass, nickel plated;
Lockwasher: Steel, nickel plated.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-51 thru A-59. For additional options not shown in catalog, consult Customer Service Center. All
models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
Bushing
8161
8168
8261
SPDT On-On
SPDT On-Mom.
DPDT On-On
H
.300" high, flat, hi torque
Contact Material
B Gold
K Gold, tin-lead
P Gold, matte-tin
Q Silver
M Silver, tin-lead
S Silver, matte-tin
G Gold over silver
L Gold over silver, tin-lead
R Gold over silver,
matte-tin
H9 .300" high, flat, hi torque
NONE No bushing choice required
Y3 7.6mm, keyway
Actuator or Plunger
S
.710" high plunger
with .375" dia. cap
Terminations
A
AV2 Vertical right angle,
Right angle, PC thru-hole
J80 Snap-in
J81 Snap-in with frame
J82 Snap-in with frame for LED
J86 Snap-in with frame & LED
PC thru-hole
PC Thru-hole
Solder lug
C
Z
L
.740" high plunger with
.395" dia. cap
A3 Right angle, snap-in, PC thru-hole
AV3 Vertical right angle, snap-in,
PC thru-hole
V3 .460" high, V-bracket
V4 .630" high, V-bracket
V6 .460" high, V-bracket
V21 .555" high, snap-in V-bracket
V31 .460" high, snap-in V-bracket
Seal
E Epoxy
L1 .740" high plunger with
.590" dia. cap
S1 .615" high plunger with
.200" dia. cap
S2 .710" high plunger with
.310" dia. cap
I
Epoxy potted base
Cap Color
2
1
3
4
5
9
Black
White
Red
Orange
Yellow
Gray
Frame Color
Black
W
.750" long, wire wrap
2
Z3 Quick connect
LED Color
Red
NONE Models without LED
3
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–50
5秒后页面跳转
MAX487芯片引脚图及功能、应用领域详解
IR2110驱动芯片引脚图及功能、电路图详解
74LS74是什么芯片 74LS74引脚图及功能表
CD4511芯片引脚图及功能、电路图解析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
