Cannon
Quadrax
Insert Arrangement Code
Polarizing Positions
Blank Polarizing hardware is supplied with the connector, but is not installed.
00
Polarizing hardware is not supplied with the connector.
01-216 Polarizing hardware is installed in positions per ARINC 600.
Special Modifier
Blank Connector is suppled with full complement of power and signal crimp contacts. Quadrax, triax,
twinax, and coax contacts are purchased separately.
F0
Connector is suppled without contacts (F0 is not marked on the connector)
Connector is suppled without contacts and without waveguide (F00 is not marked on the
connector)
F00
Solder Post
Dia.
Solder Post
Extension
.150
Size 22 Contact Part Number
Receptacle Connector
Plug Connector
030-3288-000
030-3288-003
030-3288-004
030-3288-005
SA
SB
SC
SD
0.025
031-1352-000
031-1352-001
031-1352-002
031-1352-003
0.025
.250
0.025
.375
.500
0.025
W*
Connector is suppled with full complement of signal (size 22) and power contacts per ARINC 600.
Signal contacts are front release, front removable with wrap post termination installed in the
connector. Power contacts are rear release, rear removable with crimp termination supplied
uninstalled.
Wrap Post
Square
0.025
Wrap Post
Extension
.250
Size 22 Contact Part Number
Receptacle Connector
Plug Connector
030-3310-000
030-3310-001
030-3310-002
WA
WB
WC
031-1351-000
031-1351-001
031-1351-002
0.025
.375
0.025
.500
Note: For ARINC 404 connectors due to the lack of industry standards governing the use of Quadrax contacts,
unique part numbers will be assigned for each customer application until such time that a mutually accepted
standard is adopted.
www.ittcannon.com
15