Applicable standard
Operating
Storage
-55 °C to +105 °C ( 90 %RH Max*1)
AC/DC 30V
-10 °C to +60 °C ( 90 %RH Max*1)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
Rating Voltage
Current
‐
‐
Signal : 1.2A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Visually and by measuring instrument.
Confirmed visually.
X
X
X
X
Marking
ELECTRICAL CHARACTERISTICS
30 mΩMAX*2.
1000 MΩ Min.
No breakdown.
Contact resistance
[EIA-364-23]
X
X
X
-
-
-
Measured at 100 mA MAX (DC or 1000 Hz).
[EIA-364-21]
Insulation resistance
Withstanding voltage
Measured at 500 V DC.
[EIA-364-20]
500 V AC for 1 min. current leakage 2 mA Max.
MECHANICAL CHARACTERISTICS
Insertion and
[EIA-364-13]
Insertion force
Extraction force
1) Contact resistance change: 10 mΩ MAX.
0.35N/Pin Max.
0.045N/Pin Min.
X
X
-
-
extraction forces
Mechanical operation
Measured by applicable connector.
[EIA-364-09]
100 times insertion and extractions.
2) No damage, crack and looseness of parts.
1) No electrical discontinuity of 100 ns.
2) No damage, crack and looseness of parts.
Vibration
Shock
[EIA-364-28, condition Ⅶ, condition D]
Frequency 20 to 500 Hz
X
X
-
-
Power spectral density: 0.02 G2/Hz
Performed over 15 min in each three directions.
[EIA-364-27, condition H]
Acceleration: 294 m/s2
Half sine wave pulses of 11 ms.
Performed 3 times in each of three mutually
perpendicular directions.
ENVIRONMENTAL CHARACTERISTICS
Thermal Shock
1) Contact resistance change: 10 mΩ MAX.
[EIA-364-32, condition Ⅰ]
2) No damage, crack and looseness of parts.
Temperature(°C): -55 →20 - 35 → 85 →20 - 35
X
-
Time(min):
30 → 5 Max → 30 → 5 Max
under 10 cycles.
Cyclic Temperature &
Humidity
[EIA-364-31, method Ⅲ]
Subjected to +25 °C, 80-98 % RH to
+65 °C, 90-98 % RH for 10cycles.
[EIA-364-17]
Subjected to +105 °C for 240 h.
X
X
-
-
Temperature Life
Mixed Flowing Gas
[EIA-364-65, method 2A]
1) Contact resistance change: 10 mΩ MAX.
2) No heavy corrosion which impairs
functionality.
Subjected to +30 °C, 70 % RH, Cl2: 10 ppb,
NO2: 200ppb, H2S: 10 ppb, SO2: 100 ppb.
unmated for 10 Days → mated for 4 Days
X
-
Dust
[EIA-364-91]
1) Contact resistance change: 10 mΩ MAX.
Dust concentration: 9.0g/ft3
Unmated 1 h.
Count
1
Description of revisions
DIS-F-00012979
Designed
TH.SANO
Checked
NH.TAMAI
Date
20220228
1
TM.MATSUO
NH.TAMAI
TH.SANO
20210607
Approved
Checked
Designed
Drawn
Remark
*1 No dew condensation is permitted.
*2 The value of contact resistance includes the bulk resistance.
20210607
20210603
20210603
1
Re-create by applying the latest template.
TH.SANO
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-391549-00-00
SPECIFICATION SHEET
IT14-688S-BGA-2.5H
CL0636-6001-0-00
1
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
FORM HD0011-2-1