ISP1105/1106
Advanced USB transceivers
Rev. 10 — 28 September 2009
Product data sheet
1. General description
The ISP1105/1106 range of Universal Serial Bus (USB) transceivers are compliant with
the Universal Serial Bus Specification Rev. 2.0. They can transmit and receive serial data
at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. The ISP1105/1106
range can be used as a USB device transceiver or a USB host transceiver.
They allow USB Application Specific ICs (ASICs) and Programmable Logic Devices
(PLDs) with power supply voltages from 1.65 V to 3.6 V to interface with the physical layer
of the Universal Serial Bus. They have an integrated 5 V-to-3.3 V voltage regulator for
direct powering via the USB supply VBUS
.
ISP1105 allows single-ended and differential input modes selectable by a MODE input
and it is available in HVQFN16 and HBCC16 packages. ISP1106 allows only differential
input mode and is available in both TSSOP16 and HBCC16 packages.
The ISP1105/1106 are ideal for portable electronics devices such as mobile phones,
digital still cameras, Personal Digital Assistants (PDA) and Information Appliances (IA).
2. Features
Complies with Universal Serial Bus Specification Rev. 2.0
Can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed
(1.5 Mbit/s) data rates
Integrated bypassable 5 V-to-3.3 V voltage regulator for powering via USB VBUS
VBUS disconnection indication through VP and VM
Used as a USB device transceiver or a USB host transceiver
Stable RCV output during SE0 condition
Two single-ended receivers with hysteresis
Low-power operation
Supports an I/O voltage range from 1.65 V to 3.6 V
±12 kV ESD protection at the D+, D−, VCC(5.0) and GND pins
Full industrial operating temperature range from −40 °C to +85 °C
Available in small HBCC16, HVQFN16 (only ISP1105) and TSSOP16 (only ISP1106)
packages
The ISP1105 HBCC16 and HVQFN16 are lead-free and halogen-free.
The ISP1106 HBCC16 is lead-free.