Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
ISO7330C, ISO7330FC, ISO7331C, ISO7331FC
SLLSEK9B –JANUARY 2015–REVISED APRIL 2015
ISO733x Robust EMC, Low Power, Triple-Channel Digital Isolators
1 Features
3 Description
ISO733x provide galvanic isolation up to 3000 VRMS
1
•
•
•
•
Signaling Rate: 25 Mbps
for 1 minute per UL and 4242 VPK per VDE. These
devices have three isolated channels comprised of
logic input and output buffers separated by a silicon
dioxide (SiO2) insulation barrier. ISO7330 has all
three channels in the same direction while ISO7331
has two channels in forward and one channel in
reverse direction. In case of input power or signal
loss, default output is 'low' for devices with suffix 'F'
and 'high' for devices without suffix 'F'. Used in
conjunction with isolated power supplies, these
devices prevent noise currents on a data bus or other
circuits from entering the local ground and interfering
with or damaging sensitive circuitry. ISO733x has
integrated noise filter for harsh industrial environment
where short noise pulses may be present at the
device input pins. ISO733x has TTL input thresholds
and operates from 3 V to 5.5 V supply levels.
Through innovative chip design and layout
techniques, electromagnetic compatibility of ISO733x
has been significantly enhanced to enable system-
level ESD, EFT, Surge and Emissions compliance.
Integrated Noise Filter on the Inputs
Default Output 'High' and 'Low' Options
Low Power Consumption: Typical ICC per Channel
at 1 Mbps:
–
ISO7330: 1 mA (5 V Supplies),
0.8 mA (3.3 V Supplies)
–
ISO7331: 1.4 mA (5 V Supplies),
1 mA (3.3 V Supplies)
•
Low Propagation Delay: 32 ns
Typical (5V Supplies)
•
•
•
•
Operates from 3.3 V and 5 V Supplies
3.3 V and 5 V Level Translation
Wide Temperature Range: –40°C to 125°C
70 KV/μs Transient Immunity,
Typical (5V Supplies)
•
Robust Electromagnetic Compatibility (EMC)
–
–
System-level ESD, EFT, and Surge Immunity
Low Emissions
Device Information(1)
•
•
•
Wide Body SOIC-16 Package
Isolation Barrier Life: > 25 Years
Safety and Regulatory Approvals:
PART NUMBER
ISO7330C
PACKAGE
BODY SIZE (NOM)
ISO7330FC
ISO7331C
SOIC (16)
10,3mm x 7,5mm
–
4242 VPK Isolation per DIN V VDE V 0884-10
and DIN EN 61010-1
ISO7331FC
–
–
3000 VRMS Isolation for 1 minute per UL 1577
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
CSA Component Acceptance Notice 5A, IEC
60950-1 and IEC 61010-1 End Equipment
Standards
Simplified Schematic
VCCO
VCCI
–
CQC Certification per GB4943.1-2011
Isolation
Capacitor
2 Applications
INx
OUTx
ENx
•
Opto-Coupler Replacement in:
–
Industrial FieldBus
–
–
–
ProfiBus
GNDI
GNDO
ModBus
(1) VCCI and GNDI are supply and ground
connections respectively for the input
channels.
DeviceNet™ Data Buses
–
–
–
–
Servo Control Interface
Motor Control
(2) VCCO and GNDO are supply and ground
connections respectively for the output.
Power Supplies
Battery Packs
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.