ISO7131CC, ISO7140CC, ISO7140FCC
ISO7141CC, ISO7141FCC
www.ti.com
SLLSE83E –APRIL 2013–REVISED SEPTEMBER 2013
4242-V Small-Footprint and Low-Power Triple and Quad Channels Digital Isolators
PK
Check for Samples: ISO7131CC, ISO7140CC, ISO7140FCC, ISO7141CC, ISO7141FCC
1
FEATURES
APPLICATIONS
2
•
Maximum Signaling Rate: 50 Mbps (with 5V
Supplies)
•
General-Purpose Isolation
–
Industrial Fieldbus
•
•
•
Robust Design With Integrated Noise Filter
Default Output Low Option (Suffix F)
–
–
–
Profibus
Modbus™
Low Power Consumption, Typical ICC per
Channel (with 3.3 V Supplies):
DeviceNet Data Buses
–
–
RS-232, RS-485
–
–
–
ISO7131: 1.5 mA at 1 Mbps,
2.6 mA at 25 Mbps
Serial Peripheral Interface
ISO7140: 1 mA at 1 Mbps,
2.3 mA at 25 Mbps
SAFETY AND REGULATORY
APPROVALS
ISO7141: 1.3 mA at 1 Mbps,
2.6 mA at 25 Mbps
•
2500 VRMS Isolation for 1 minute per UL 1577
(Approved)
•
Low Propagation Delay: 23 ns Typical
(3.3 V Supplies)
•
4242 VPK Isolation per DIN EN 60747-5-2 (VDE
0884 Teil 2), 566 VPK Working Voltage
(Approved)
•
•
•
•
Wide Temperature Range: –40°C to 125°C
50 kV/µs Transient Immunity, Typical
Long Life with SiO2 Isolation Barrier
•
•
•
CSA Component Acceptance Notice 5A
(Approval Pending)
IEC 60950-1 and IEC 61010-1 End Equipment
Standards (Approval Pending)
Operates From 2.7 V, 3.3 V and 5 V Supply and
Logic Levels
GB 4943.1-2011 and GB 8898:2011 CQC
Certification (Approval Pending)
•
Small QSOP-16 Package
DESCRIPTION
ISO7131, ISO7140, and ISO7141 provide galvanic isolation up to 2500 VRMS for 1 minute per UL and 4242 VPK
per VDE. ISO7131 has three channels with two forward and one reverse-direction channels. ISO7140 and
ISO7141 are quad-channel isolators; ISO7140 has four forward, ISO7141 has three forward and one reverse-
direction channels. These devices are capable of 50 Mbps maximum data rate with 5V supplies and 40Mbps
maximum data rate with 3.3V or 2.7V supplies, with integrated filters on the inputs for noise-prone applications.
The suffix F indicates that default output state is low; otherwise, the default output state is high (see Table 1).
Each isolation channel has a logic input and output buffer separated by a silicon dioxide (SiO2) insulation barrier.
Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other
circuits from entering the local ground and interfering with or damaging sensitive circuitry. The devices have TTL
input thresholds and can operate from 2.7 V, 3.3 V, and 5 V supplies. All inputs are 5V tolerant when supplied
from a 2.7V or 3.3V supply.
PIN CONFIGURATIONS (TOP VIEW)
ISO7140
ISO7131
ISO7141
VCC1
VCC2
VCC1
VCC2
VCC1
VCC2
1
2
16
15
1
2
16
15
1
2
16
15
GND2
OUTA
OUTB
INC
GND1
GND2
OUTA
OUTB
OUTC
OUTD
EN
GND2
OUTA
OUTB
OUTC
IND
GND1
INA
GND1
INA
3
4
5
6
7
8
14
13
12
11
10
9
INA
INB
INC
3
4
5
6
7
8
14
13
12
11
10
9
3
4
5
6
7
8
14
13
12
11
10
9
INB
INB
OUTC
NC
INC
NC
OUTD
EN1
IND
NC
EN1
EN2
EN2
GND1
GND2
GND1
GND1
GND2
GND2
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Modbus is a trademark of Gould Inc.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated