5秒后页面跳转
ISO1540_15 PDF预览

ISO1540_15

更新时间: 2024-09-28 02:58:19
品牌 Logo 应用领域
德州仪器 - TI /
页数 文件大小 规格书
21页 449K
描述
Low-Power Bidirectional I2C Isolators

ISO1540_15 数据手册

 浏览型号ISO1540_15的Datasheet PDF文件第2页浏览型号ISO1540_15的Datasheet PDF文件第3页浏览型号ISO1540_15的Datasheet PDF文件第4页浏览型号ISO1540_15的Datasheet PDF文件第5页浏览型号ISO1540_15的Datasheet PDF文件第6页浏览型号ISO1540_15的Datasheet PDF文件第7页 
ISO1540  
ISO1541  
www.ti.com  
SLLSEB6 JULY 2012  
Low-Power Bidirectional I2C Isolators  
Check for Samples: ISO1540, ISO1541  
1
FEATURES  
SAFETY AND REGULATORY  
APPROVALS  
Isolated Bidirectional, I2C Compatible,  
Communications  
2
4000-VPK Isolation per DIN EN 60747-5-2  
(VDE 0884 Part 2) (Pending)  
Supports up to 1 MHz Operation  
3-V to 5.5-V Supply Range  
2500-VRMS Isolation for 1 minute per UL 1577  
(Approved)  
Open Drain Outputs with 3.5-mA Side 1 and  
35-mA Side 2 Sink Current Capability  
CSA Component Acceptance Notice 5A  
(Pending)  
-40°C to 125°C Operating Temperature  
±50 kV/µs Transient Immunity (Typical)  
IEC 60950-1 and IEC 61010-1 End Equipment  
Standards (Pending)  
HBM ESD Protection of 4 kV on All Pins;  
8 kV on Bus Pins  
ISO1540  
ISO1541  
VCC1 1  
SDA1 2  
SCL1 3  
GND1 4  
8 VCC2  
7 SDA2  
6 SCL2  
5 GND2  
VCC1 1  
SDA1 2  
SCL1 3  
GND1 4  
8 VCC2  
7 SDA2  
6 SCL2  
5 GND2  
APPLICATIONS  
Isolated I2C Bus  
SMBus and PMBus Interfaces  
Open-drain Networks  
Motor Control Systems  
Battery Management  
I2C Level Shifting  
Side 1  
Side 2  
Side 1  
Side 2  
DESCRIPTION  
The ISO1540 and ISO1541 are low-power, bidirectional isolators that are compatible with I2C interfaces. These  
devices have their logic input and output buffers separated by TI’s Capacitive Isolation technology using a silicon  
dioxide (SiO2) barrier. When used in conjunction with isolated power supplies, these devices block high voltages,  
isolate grounds, and prevent noise currents from entering the local ground and interfering with or damaging  
sensitive circuitry.  
This isolation technology provides for function, performance, size, and power consumption advantages when  
compared to opto-couplers. The ISO1540 and ISO1541 enable a complete isolated I2C interface to be  
implemented within a small form factor.  
The ISO1540 has two isolated bidirectional channels for clock and data lines while the ISO1541 has a  
bidirectional data and a unidirectional clock channel. The ISO1541 is useful in applications that have a single  
Master while the ISO1540 is ideally fit for multi-master applications.  
Isolated bidirectional communications is accomplished within these devices by offsetting the Side 1 Low-Level  
Output Voltage to a value greater than the Side 1 High-Level Input Voltage thus preventing an internal logic latch  
that otherwise would occur with standard digital isolators.  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
2
I2C is a trademark of NXP B.V Corporation.  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2012, Texas Instruments Incorporated  

与ISO1540_15相关器件

型号 品牌 获取价格 描述 数据表
ISO1540D TI

获取价格

Low-Power Bidirectional I2C Isolators
ISO1540DR TI

获取价格

Low-Power Bidirectional I2C Isolators
ISO1540-Q1 TI

获取价格

汽车类 2.5kVrms、隔离式双向时钟、双向 I2C 隔离器
ISO1540QDQ1 TI

获取价格

汽车类 2.5kVrms、隔离式双向时钟、双向 I2C 隔离器 | D | 8 | -40
ISO1540QDRQ1 TI

获取价格

汽车类 2.5kVrms、隔离式双向时钟、双向 I2C 隔离器 | D | 8 | -40
ISO1541 TI

获取价格

Low-Power Bidirectional I2C Isolators
ISO1541D TI

获取价格

Low-Power Bidirectional I2C Isolators
ISO1541DR TI

获取价格

Low-Power Bidirectional I2C Isolators
ISO1541-Q1 TI

获取价格

汽车类 2.5kVrms、隔离式单向时钟、双向 I2C 隔离器
ISO1541QDQ1 TI

获取价格

汽车类 2.5kVrms、隔离式单向时钟、双向 I2C 隔离器 | D | 8 | -40