ISO150
Dual, Isolated, Bi-Directional
DIGITAL COUPLER
FEATURES
APPLICATIONS
● REPLACES HIGH-PERFORMANCE
● DIGITAL ISOLATION FOR A/D, D/A
OPTOCOUPLERS
CONVERSION
● DATA RATE: 80M Baud, typ
● ISOLATED UART INTERFACE
● MULTIPLEXED DATA TRANSMISSION
● LOW POWER CONSUMPTION:
25mW Per Channel, max
● ISOLATED PARALLEL TO SERIAL
●
TWO CHANNELS, EACH BI-DIRECTIONAL,
PROGRAMMABLE BY USER
INTERFACE
●TEST EQUIPMENT
● PARTIAL DISCHARGE TESTED: 2400Vrms
● CREEPAGE DISTANCE OF 16.5mm (DIP)
● LOW COST PER CHANNEL
● MICROPROCESSOR SYSTEM INTERFACE
● ISOLATED LINE RECEIVER
● GROUND LOOP ELIMINATION
● PLASTIC DIP AND SOIC PACKAGES
DESCRIPTION
The ISO150 is a two-channel, galvanically isolated
data coupler capable of data rates of 80MBaud, typi-
cal. Each channel can be individually programmed to
transmit data in either direction.
ISO150 avoids the problems commonly associated
with optocouplers. Optically isolated couplers require
high current pulses and allowance must be made for
LED aging. The ISO150’s Bi-CMOS circuitry oper-
ates at 25mW per channel.
Data is transmitted across the isolation barrier by
coupling complementary pulses through high voltage
0.4pF capacitors. Receiver circuitry restores the pulses
to standard logic levels. Differential signal transmis-
sion rejects isolation-mode voltage transients up to
1.6kV/µs.
ISO150 is available in a 24-pin DIP package and in a
28-lead SOIC. Both are specified for operation from
–40˚C to 85˚C.
GA
D2A
VSB
D2B
R/T2A
R/T2B
Channel 2
Side A
Side B
Channel 1
VSA
D1A
GB
D1B
R/T1A
R/T1B
International Airport Industrial Park
•
Mailing Address: PO Box 11400
Cable: BBRCORP
•
Tucson, AZ 85734
•
Street Address: 6730 S. Tucson Blvd.
• Tucson, AZ 85706
Tel: (520) 746-1111 Twx: 910-952-1111
•
•
•
Telex: 066-6491
•
FAX: (520) 889-1510
•
Immediate Product Info: (800) 548-6132
© 1993 Burr-Brown Corporation
PDS-1213B
Printed in U.S.A. August, 1994