9 mm x 14 mm Plastic Package SMD Oscillator, TTL / HC-MOS
ISM61 Series
Product Features:
Applications:
Fibre Channel
Server & Storage
Sonet /SDH
Low Jitter, Non-PLL Based Output
CMOS/TTL Compatible Logic Levels
Compatible with Leadfree Processing
802.11 / Wifi
T1/E1, T3/E3
System Clock
Frequency
30 KHz to 150.000 MHz
Output Level
HC-MOS
TTL
‘0’ = 0.1 Vcc Max., ‘1’ = 0.9 Vcc Min.
‘0’ = 0.4 VDC Max., ‘1’ = 2.4 VDC Min.
Duty Cycle
Specify 50% 10% or 5% See Table in Part Number Guide
Rise / Fall Time
Output Load
5 nS Max. @ Vcc = +3.3 VDC, 10 nS Max. @ Vcc = +5 VDC ***
Fo < 50 MHz = 10 TTL, Fo > 50 MHz = 5 LSTTL See Table in Part
Number Guide
Frequency Stability
Start-up Time
See Frequency Stability Table (Includes room temperature tolerance and
stability over operating temperature)
10 mS Max.
100 nS Max. N.C. or 70% Vdd = Enable. 30% Vdd = Disable.
Enable / Disable
Time
Supply Voltage
See Input Voltage Table, tolerance 5 %
70 mA Max. ***
Current
Operating
Storage
See Operating Temperature Table in Part Number Guide
-55q C to +125q C
Jitter:
RMS(1sigma)
1 MHz-75 MHz
76 MHz-150 MHz
Max Integrated
1 MHz-75 MHz
76 MHz-150 MHz
Max Total Jitter
1 MHz-75 MHz
76 MHz-150 MHz
5 pS RMS (1 sigma) Max. accumulated jitter (20K adjacent periods)
3 pS RMS (1 sigma) Max. accumulated jitter (20K adjacent periods)
1.5 pS RMS (1 sigma -12KHz to 20MHz)
1 pS RMS (1 sigma -12KHz to 20MHz)
50 pS p-p (100K adjacent periods)
30 pS p-p (100K adjacent periods)
Part Number Guide
Sample Part Number:
ISM61 - 3251BH - 20.000
Package
Input
Operating
Symmetry
(Duty Cycle)
5 = 45 / 55 Max.
6 = 40 / 60 Max.
Output
Stability
(in ppm)
**E = r10
**D = r15
**F = r20
**A = r25
B = r50
Enable /
Disable
Frequency
Voltage
5 = 5.0 V
3 = 3.3 V
7 = 3.0 V
2 = 2.7 V
6 = 2.5 V
1 = 1.8 V*
Temperature
1 = 0q C to +70q C
6 = -10q C to +70q C
3 = -20q C to +70q C
4 = -30q C to +75q C
2 = -40q C to +85q C
1 = 10TTL / 15 pF HC-MOS
6 = 30 pF
H = Enable
O = N/C
ISM61 -
5 = 50 pF HC-MOS (<40 MHz)
- 20.000 MHz
C = r100
NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and GND (pin 2) to minimize power supply noise.
* Not available at all frequencies. ** Not available for all temperature ranges. *** Frequency, supply, and load related parameters.
e-mail@ilsiamerica.com • www.ilsiamerica.com
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: e-mail@ilsiamerica.com • www.ilsiamerica.com
Specifications subject to change without notice
06/09
Page 1