DATA SHORT
To request the full datasheet, please visit www.intersil.com/products/isl95833b
ISL95833B
FN8561
Rev 0.00
June 24, 2013
Dual 2+1 PWM Controller for IMVP-7/VR12 CPUs
The ISL95833B Pulse Width Modulation (PWM) controller IC
provides a complete solution for IMVP-7/VR12™ compliant
microprocessor and graphic processor core power supplies. It
provides the control and protection for two Voltage Regulators
Features
• Serial data bus
• Dual outputs:
(VRs). The first VR, typically for V
, incorporates 1
CORE
- Configurable 2- or 1-phase for the 1st output using one
integrated gate driver
integrated driver and can operate in 2- or 1-phase
configurations. The second VR, typically for graphics, is a
single phase regulator incorporating an integrated driver. The
two VRs share a serial control bus to communicate with the
CPU and achieve lower cost and smaller board area compared
with the two-chip approach.
- 1-phase for the 2nd output using an integrated gate driver
• R3™ Modulator
- Excellent transient response
- High light load efficiency
Both VRs utilize Intersil's Robust Ripple Regulator
R3 Technology™. The R3 modulator has numerous advantages
compared to traditional modulators, including faster transient
response, variable switching frequency during load transients,
and improved light load efficiency due to its ability to
automatically change switching frequency.
• 0.5% system accuracy over-temperature
• Supports multiple current sensing methods
- Lossless inductor DCR current sensing
- Precision resistor current sensing
• Differential remote voltage sensing
The ISL95833B has several other key features. Both outputs
support either DCR current sensing with a single NTC
thermistor for DCR temperature compensation, or more
precise resistor current sensing if desired. Both outputs come
with remote voltage sense, programmable VBOOT voltage,
IMAX, and switching frequency, adjustable overcurrent
protection and separate Power-Good signals.
• Programmable VBOOT voltage at start-up
• Resistor programmable IMAX and switching frequency
(400kHz ~ 600kHz) for both outputs
• Adaptive body diode conduction time reduction
Applications
• IMVP-7/VR12 compliant computers
VIN
VR2
VIN
0.91
V
= 19V
IN
0.90
0.89
0.88
0.87
0.86
0.85
0.84
0.83
0.82
0.81
0.80
VR1
ISL6208
DRIVER
ISL95833B
VIN
V
= 12V
IN
V
= 8V
54
IN
0
6
12
18
24 30
36
(A)
42
48
60
66
I
OUT
FIGURE 1. SIMPLIFIED APPLICATION CIRCUIT
FIGURE 2. LOAD LINE REGULATION
FN8561 Rev 0.00
June 24, 2013
Page 1 of 2