Datasheet > ISL9502CRZ-T

ISL9502CRZ-T

更新时间： 2024-02-08 15:34:47

品牌	Logo	应用领域
英特矽尔 - INTERSIL		/
页数	文件大小	规格书
24页	535K
描述
Two-Phase PWM Controller for Graphics Processor Units (GPU)

阅读下载

中文翻译

获取价格

数据手册
替代型号

如果您发现信息不准确，欢迎纠错

ISL9502CRZ-T 数据手册

ISL9502

Data Sheet

July 17, 2006

FN9275.1

Two-Phase PWM Controller for Graphics

Processor Units (GPU)

Features

• Precision Two-phase Buck PWM controller

- 0.5% System Accuracy Over Temperature

- Active Voltage Positioning Capability

Increase in GPU clock frequency is accompanied by

associated increase in the demand for power and transient-

current slew rate. At the same time, the voltage tolerance

requirement during steady-state and transient operation is

becoming more stringent of advanced GPU. The ISL9502 is

a two-phase PWM controller with embedded gate drivers,

which is tailored to meet the power and dynamic

• Internal Gate Driver with 2A Driving Capability

• Superior Load Transient Response

• Dynamic Phase Adding/Dropping

• Voltage Selection Input

requirements. The two-phase buck converter uses two

interleaved channels to effectively double the output voltage

ripple frequency and thereby reduce output voltage ripple

amplitude with fewer components, lower component cost,

reduced power dissipation, and smaller real estate area.

- 6-Bit VSEL Input

- 0.500V to 1.500V in 25mV Steps

- Supports VSEL Change On-The-Fly

• Multiple Current-Sensing Schemes Supported

- Lossless Inductor DCR Current Sensing

- Precision Resistive Current Sensing

The heart of the ISL9502 is the patented R3 (Robust Ripple

Regulator®) modulator. Compared with the traditional multi-

phase buck regulator, R3 technology has the fastest transient

response. This is due to the R3 modulator commanding

variable switching frequency during a load transient.

• Thermal Monitor

• User Programmable Switching Frequency

• Differential Remote GPU Voltage Sensing

• Static and Dynamic Current Sharing

At heavy load operation of the active mode, ISL9502

commands the two phase continuous conduction mode

(CCM) operation. While the pin SET3 is asserted at the

medium or light load, the ISL9502 smoothly disables one

phase and operates in a one-phase operation. Once in one-

phase operation, when the GPU further lowers the load

current, the ISL9502 enables diode emulation to maximize

efficiency at light load depending on the logic of SET1 and

SET2.

• Overvoltage, Undervoltage, and Overcurrent Protection

• Pb-Free Plus Anneal Available (RoHS Compliant)

Ordering Information

PART

TEMP.

(°C)

PKG.

NUMBER

MARKING

PACKAGE DWG. #

A 6-bit digital-to-analog converter (DAC) allows dynamic

adjustment of the output voltage from 0.500V to 1.500V with

25mV step. A 0.5% system accuracy of the core output

voltage over temperature is achieved by the ISL9502.

ISL9502CRZ ISL9502CRZ -10 to 100 48 Ld7x7 QFN L48.7x7

(Note) (Pb-free)

ISL9502CRZ-T ISL9502CRZ -10 to 100 48 Ld7x7 QFN L48.7x7

(Note) (Pb-free)

A unity-gain differential amplifier is provided for remote GPU

die sensing. This allows the voltage on the GPU die to be

accurately measured and regulated. Current sensing can be

realized using either lossless inductor DCR sensing or

precision resistor sensing. A single NTC thermistor network

can thermally compensates the gain and the time constant of

the DCR variations. Droop control, also referred as adaptive

voltage positioning (AVP), is implemented in ISL9502 to

reduce output decoupling capacitors and achieve more cost-

effective transient-load regulation.

NOTE: Intersil Pb-free plus anneal products employ special Pb-free

material sets; molding compounds/die attach materials and 100%

matte tin plate termination finish, which are RoHS compliant and

compatible with both SnPb and Pb-free soldering operations. Intersil

Pb-free products are MSL classified at Pb-free peak reflow

temperatures that meet or exceed the Pb-free requirements of

IPC/JEDEC J STD-020.

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.

All other trademarks mentioned are the property of their respective owners.

12 3 4 5 6 7...24

中文翻译

下载PDF

ISL9502CRZ-T 替代型号

型号	品牌	替代类型	描述	数据表
ISL9502CRZ	INTERSIL	完全替代	Two-Phase PWM Controller for Graphics Processor Units (GPU)

与ISL9502CRZ-T相关器件

型号	品牌	获取价格	描述	数据表
ISL9506HRZ	RENESAS	获取价格	DUAL SWITCHING CONTROLLER, 315kHz SWITCHING FREQ-MAX, PQCC40, 6 X 6 MM, ROHS COMPLIANT, PL
ISL9506HRZ-T	RENESAS	获取价格	DUAL SWITCHING CONTROLLER, 315kHz SWITCHING FREQ-MAX, PQCC40, 6 X 6 MM, ROHS COMPLIANT, PL
ISL9518	INTERSIL	获取价格	Narrow VDC Regulator/Charger with SMBus Interface
ISL9518A	INTERSIL	获取价格	Narrow VDC Regulator/Charger with SMBus Interface
ISL9518AHRTZ	INTERSIL	获取价格	Narrow VDC Regulator/Charger with SMBus Interface
ISL9518AHRTZ	RENESAS	获取价格	SWITCHING REGULATOR, 440kHz SWITCHING FREQ-MAX, QCC28, 4 X 4 MM, ROHS COMPLIANT, PLASTIC,
ISL9518AHRTZ-T	RENESAS	获取价格	SWITCHING REGULATOR, 440kHz SWITCHING FREQ-MAX, QCC28, 4 X 4 MM, ROHS COMPLIANT, PLASTIC,
ISL9518HRTZ	INTERSIL	获取价格	Narrow VDC Regulator/Charger with SMBus Interface
ISL9518HRTZ	RENESAS	获取价格	SWITCHING REGULATOR, 440kHz SWITCHING FREQ-MAX, QCC28, 4 X 4 MM, ROHS COMPLIANT, PLASTIC,
ISL9518HRTZ-T	RENESAS	获取价格	SWITCHING REGULATOR, 440kHz SWITCHING FREQ-MAX, QCC28, 4 X 4 MM, ROHS COMPLIANT, PLASTIC,

与ISL9502CRZ-T相关文章

共享储能电站：数据驱动与政策引领下的黄金机遇
2024-06-26

8
US1M数据手册解读：产品特性、替换型号推荐
2024-06-26

2
解析BAV99LT1G手册：参数分析、替换型号推荐
2024-06-26

1
解读BSS138PW数据手册：产品特性、电气参数及替换型号推荐
2024-06-26

3

产品中心

服务支持

精选活动

关于我们

帮助中心

ISL9502CRZ-T

ISL9502CRZ-T 数据手册

ISL9502CRZ-T 替代型号

与ISL9502CRZ-T相关器件

与ISL9502CRZ-T相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ISL9502CRZ-T

ISL9502CRZ-T 数据手册

ISL9502CRZ-T 替代型号

与ISL9502CRZ-T相关器件

与ISL9502CRZ-T相关文章

您还可以找

您在本页遇到什么问题？