DATASHEET
ISL9105
FN6415
Rev 2.00
March 28, 2008
600mA Low Quiescent Current 1.6MHz High Efficiency Synchronous Buck
Regulator
ISL9105 is a 600mA, 1.6MHz step-down regulator that is
ideal for powering low-voltage microprocessors in handheld
Features
• High Efficiency Synchronous Buck Regulator with up to
95% Efficiency
devices such as PDAs and cellular phones. It is optimized
for generating low output voltages down to 0.8V. The supply
voltage range is from 2.7V to 5.5V, allowing for the use of a
single Li+ cell, three NiMH cells or a regulated 5V input. It
has a guaranteed minimum output current of 600mA.
1.6MHz pulse-width modulation (PWM) switching frequency
allows for use of small external components. It has flexible
operation mode selection of forced PWM mode and low IQ
mode with typical 25µA quiescent current for highest light
load efficiency to maximize battery life.
• Selectable Forced PWM Mode and SKIP Mode
• 25µA Quiescent Supply Current in SKIP Mode
• 2.7V to 5.5V Supply Voltage
• 216ms POR Timer
• 3% Output Accuracy Over Temperature/Line/Load
• 600mA Guaranteed Output Current
• Less than 1µA Logic Controlled Shutdown Current
• 100% Maximum Duty Cycle for Lowest Dropout
• Discharge Output Capacitor when Shutdown
• Internal Loop Compensation
The ISL9105 includes a pair of low ON-resistance
P-Channel and N-Channel internal MOSFETs to maximize
efficiency and minimize external component count. 100%
duty-cycle operation allows less than 200mV dropout voltage
at 600mA output current.
The ISL9105 offers a typical 216ms Power-On-Reset (POR)
timer at power-up. The timer output can be reset by RSI.
When shutdown, ISL9105 discharges the output capacitor.
Other features include internal digital soft-start, enable for
power sequence, overcurrent protection, and thermal
shutdown.
• Internal Digital Soft-Start
• Peak Current Limit Protection, Short Circuit Protection
• Over-Temperature Protection
• Enable
The ISL9105 is offered in a 2mmx3mm 8 Ld DFN package
with 1mm maximum height. The complete converter
occupies less than 1cm area.
• Small 8 Ld 2mmx3mm DFN
2
• Pb-free (RoHS Compliant)
Applications
Ordering Information
TEMP.
RANGE
(°C)
• Single Li-Ion Battery-Powered Equipment
• DSP Core Power
PART NUMBER
(NOTE)
PART
MARKING
PACKAGE
(Pb-free)
PKG.
DWG. #
• PDAs and Palmtops
ISL9105IRZ-T*
05Z
-40 to +85 8 Ld 2x3 DFN L8.2x3
*Please refer to TB347 for details on reel specifications.
Pinout
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets; molding compounds/die attach materials
and 100% matte tin plate PLUS ANNEAL - e3 termination finish, which
is RoHS compliant and compatible with both SnPb and Pb-free
soldering operations. Intersil Pb-free products are MSL classified at Pb-
free peak reflow temperatures that meet or exceed the Pb-free
requirements of IPC/JEDEC J STD-020.
ISL9105
(8 LD DFN)
TOP VIEW
VIN
PHASE
1
2
3
4
8
7
6
5
EN
POR
GND
FB
MODE
RSI
FN6415 Rev 2.00
March 28, 2008
Page 1 of 11