DATASHEET
ISL8484
FN6128
Rev 5.00
May 12, 2008
Ultra Low ON-Resistance, +1.65V to +4.5V, Single Supply, Dual SPDT Analog
Switch
The Intersil ISL8484 device is a low ON-resistance, low
voltage, bidirectional, dual single-pole/double-throw (SPDT)
Features
• Pin Compatible Replacement for the MAX4684 and
MAX4685
analog switch designed to operate from a single +1.65V to
+4.5V supply. Targeted applications include battery powered
equipment that benefit from low r
(0.29 and fast
• ON-Resistance (r )
ON
ON
switching speeds (t
input is 1.8V logic-compatible when using a single +3V supply.
= 40ns, t
= 20ns). The digital logic
- V+ = +4.3V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.29
- V+ = +3.0V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.33
- V+ = +1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.55
ON
OFF
With a supply voltage of 4.2V and logic high voltage of 2.85V
at both logic inputs, the part draws only 12µA max of I+
current.
• r
Matching Between Channels . . . . . . . . . . . . . . . . .0.06
Flatness Across Signal Range . . . . . . . . . . . . . . . .0.03
ON
ON
• r
Cell phones, for example, often face ASIC functionality
limitations. The number of analog input or GPIO pins may be
limited and digital geometries are not well suited to analog
switch performance. This part may be used to “mux-in”
additional functionality while reducing ASIC design risk. The
ISL8484 is offered in small form factor packages, alleviating
board space limitations.
• Single Supply Operation. . . . . . . . . . . . . . . . +1.65V to +4.5V
• Low Power Consumption (P ) . . . . . . . . . . . . . . .<0.45µW
D
• Fast Switching Action (V+ = +4.3V)
- t
- t
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40ns
ON
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20ns
OFF
• ESD HBM Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >8kV
• Guaranteed Break-Before-Make
The ISL8484 is a committed dual single-pole/double-throw
(SPDT) that consist of two normally open (NO) and two
normally closed (NC) switches. This configuration can be
used as a dual 2-to-1 multi-plexer. The ISL8484 is pin
compatible with the MAX4684 and MAX4685.
• 1.8V Logic Compatible (+3V supply)
• Low I+ Current when V H is not at the V+ Rail
IN
• Available in 10 Ld 3x3 TDFN and 10 Ld MSOP
• Pb-Free Available (RoHS Compliant)
TABLE 1. FEATURES AT A GLANCE
ISL8484
NUMBER OF SWITCHES
SW
2
SPDT or 2-1 MUX
0.29
Applications
• Battery-powered, Handheld, and Portable Equipment
- Cellular/mobile Phones
4.3V r
ON
- Pagers
4.3V t /t
ON OFF
40ns/20ns
- Laptops, Notebooks, Palmtops
3V r
0.33
ON
• Portable Test and Measurement
• Medical Equipment
3V t /t
50ns/27ns
ON OFF
1.8V r
0.55
ON
1.8V t /t
• Audio and Video Switching
70ns/54ns
ON OFF
Packages
10 Ld 3x3 Thin DFN, 10 Ld MSOP
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Application Note AN557 “Recommended Test Procedures
for Analog Switches”
FN6128 Rev 5.00
May 12, 2008
Page 1 of 13