Datasheet
ISL81802
80V Dual Synchronous Buck Controller
The ISL81802 is a dual synchronous buck controller
that generates two independent outputs or one output
with two interleaved phases for a wide variety of
applications in industrial and general purpose
segments. With a wide input and output voltage
ranges, the controller is suitable for
Features
• Wide input voltage range: 4.5V to 80V
• Wide output voltage range: 0.8V to 76V
• Four MOSFET drivers with adaptive shoot-through
protection
telecommunication, data center, and computing
applications.
• Constant output voltage and output current
feedback loop control
The ISL81802 uses peak current mode control with
phase interleaving for the two outputs. Each output
has a voltage regulator, current monitor, and average
current regulator to provide independent average
voltage and current control. The internal
• Light-load efficiency enhancement
○ Low ripple diode emulation and burst mode
operation
• Programmable soft-start
Phase-Locked Loop (PLL) oscillator assures an
accurate frequency setting from 100kHz to 1MHz, and
the oscillator can be synchronized to an external clock
signal for frequency synchronization and phase
interleave paralleling applications. This PLL circuit
can output a phase-shift-programmable clock signal
that is expanded to three, four, and six phases with
required interleaving phase shift.
• Supports startup into pre-biased rails
• Programmable frequency: 100kHz to 1MHz
• Supports current sharing with cascade phase
interleaving
• External clock sync
• Clock out with accurate phase angle controlled by
PLL or frequency dithering
The ISL81802 features programmable soft-start and
accurate threshold enable functions along with a
power-good indicator to simplify power supply rail
sequencing. It also provides full protection features
such as OVP, UVP, OTP, and average and peak
current limit on both outputs to ensure high reliability.
• PGOOD indicator
• Output current monitor
• Selectable mode between PWM/DE/Burst
• Accurate EN/UVLO threshold: ±2%
• Low shut down current: 5µA
The IC is packaged in a spac- conscious 32 Ld
5mmx5mm TQFN or an easy to assemble
4.4mmx9.7mm 38 Ld HTSSOP package. Both
packages use an EPAD to improve thermal
performance and noise immunity. The full feature
design with low pin count makes the ISL81802 an
ideal solution for quick time to market simple power
supply designs.
• Complete protection: OCP (pulse by pulse and
optional hiccup or constant current mode), OVP,
OTP, and UVP
Applications
• Telecommunication
• Server and data center
• Automotive electronics
• Industrial equipment
• Power system
Related Literature
For a full list of related documents, visit our website:
• ISL81802 device page
R16DS0033EU0101 Rev.1.01
Oct.15.20
Page 1 of 44