DATASHEET
ISL78419
FN8292
Rev 3.00
June 27, 2014
Integrated Automotive TFT-LCD Power Supply Regulator
The ISL78419 is an integrated power management IC (PMIC) for
TFT-LCDs used in central display, rear seat entertainment and
virtual dashboards. The device integrates a boost converter for
Features
• 2.5V to 5.5V input
generating AV , an LDO regulator for V
generated by a charge pump driven by the switch node of the
boost converter. The ISL78419 also includes a V slice circuit,
reset function, and a high performance VCOM amplifier with a
Digitally Controlled Potentiometer (DCP) that is used as a VCOM
calibrator.
. V and V are
• 1.5A, 0.18Ω integrated boost FET
• V /V supplies generated by charge pumps driven by the
DD LOGIC ON
OFF
ON OFF
boost switch node
ON
• LDO for V channel
LOGIC
• 600kHz/1200kHz selectable switching frequency
• Integrated gate pulse modulator
• Reset signal generated by supply monitor
• Integrated VCOM amplifier
The AV boost converter features a 1.5A/0.18Ωboost FET with
DD
600kHz/1200kHz switching frequency.
The integrated logic LDO includes a 350mA FET for driving the low
voltage needed by external digital circuitry.
• DCP
2
The gate pulse modulator can control the gate voltage up to 30V,
and both the rate and slew delay times are selectable.
- I C serial interface, address: 0101000, MSB left
- Wiper position stored in 8-bit nonvolatile memory and
recalled on power-up
The supply monitor generates a reset signal when the system is
powered down based on a user selected threshold level
(programming resistor).
- Endurance, 1,000 data changes per bit
• UVLO, UVP, OVP, OCP, and OTP protection
• Pb-free (RoHS compliant)
• 28 Ld 4x5 QFN
The ISL78419 provides a digitally controlled VCOM output using
2
I C interface. One VCOM amplifier is also integrated in the chip to
provide a fast slewing 150mA drive (sourcing or sinking). The
output of the VCOM is powered up with the voltage stored at the
last programmed 8-bit (internal) EEPROM setting.
• AEC-Q100 qualified
Applications
• Automotive TFT displays
The ISL78419 is rated to operate over the temperature range
of (-40°C to +105°C) and is qualified according to AEC-Q100.
- Central displays, rear seat entertainment and dashboards
Pin Configuration
ISL78419 (28 LD 4x5 QFN)
TOP VIEW
28
27
26
25
24
23
FB
PGND
CE
L_IN
1
2
3
4
5
6
7
8
22
21
20
CD2
L_OUT
RESET
ADJ
RE
19
18
17
16
15
GND
THERMAL
PAD
VGH
VGHM
VFLK
VDPM
VDIV
NEG
VOUT
9
10
11
12
13
14
FN8292 Rev 3.00
June 27, 2014
Page 1 of 20