Datasheet
ISL70100SEH, ISL73100SEH
Radiation Hardened 40V Current Sense Amplifiers
The ISL70100SEH and ISL73100SEH are radiation
hardened 40V current sense amplifiers built on the
Renesas proprietary PR40 SOI process. These
devices have a wide power supply range of 2.7V to
40V. The input common-mode voltage is independent
of the supply voltage and extends from -0.3V to
40.0V, making them ideal to use in both high-side and
low-side applications.
Features
• Power supply range: 2.7V to 40V
• Input common-mode range: -0.3V to 40V
• Transconductance: 2µA/mV (typical)
○ ±1% accuracy (T = 25°C)
A
○ ±1.5% accuracy (T = -55°C, 125°C)
A
The ISL70100SEH and ISL73100SEH are
trans-conductance amplifiers that monitor current
using an external sense resistor and output a current
proportional to the sensed voltage. The overall
voltage gain is adjustable with a single resistor from
the output to ground.
• Voltage offset: 10µV (typical), V+ = 12V
• Adjustable gain with a single resistor
• Radiation acceptance testing - ISL70100SEH
○ HDR (50-300rad(Si)/s): 100krad(Si)
○ LDR (<10mrad(Si)/s): 75krad(Si)
These amplifiers have an extremely low offset voltage
and input bias currents, making them ideal for
precision sensing applications. They have a minimum
bandwidth of 500kHz with a slew rate of 500µA/µs
that make them useful for current feedback in
telemetry applications. When the parts are powered
down (V+ = V- = 0V), the sense pins (RS+, RS-) are
high impedance to avoid loading the monitored circuit.
• Radiation acceptance testing - ISL73100SEH
○ LDR (<10mrad(Si)/s): 75krad(Si)
• SEE hardness (see SEE report for details)
2
○ No SEB (V+ = 35V): 86.4MeV•cm /mg
2
○ No SEB (V+ = 42V): 43.0MeV•cm /mg
• Electrically Screened to SMD 5962-20212
The parts are available in a hermetically sealed 10 Ld
ceramic flat-pack package or die form and operate
across the full-range military temperature of -55°C to
+125°C.
Applications
• High-side or low-side current sensing
• Battery monitoring
Related Literature
• Power management
For a full list of related documents, visit our website:
ISL70100SEH and ISL73100SEH product pages
• Motor control
• Command, telemetry, and control systems
28V
2.026
2.016
2.006
1.996
12V
VOUT = (VSEN(mV) * 2µA/mV) * ROUT
RH ADC
+
VSEN
-
RSENSE
ISL70100SEH
1.986
1.976
1.966
-55°C
25°C
ROUT
125°C
-10
0
10
20
30
40
50
Input Common-Mode Voltage (V)
Figure 1. Typical Application: High-Side Current Sense for
28V Supply Rail
Figure 2. Transconductance, V+ = 12V
R34DS0009EU0101 Rev.1.01
Jul.10.20
Page 1 of 27