DATASHEET
ISL72026ASEH
3.3V Radiation Tolerant CAN Transceiver with Listen Mode and Loopback
FN8861
Rev. 1.00
Jul 27, 2017
The Intersil ISL72026ASEH is a radiation tolerant, 3.3V
CAN transceivers that is compatible with the
ISO11898-2 standard for applications calling for
Controller Area Network (CAN) serial communication in
satellites and aerospace communications and telemetry
data processing in harsh industrial environments.
Features
• Electrically screened to SMD 5962-15228
• ESD protection on all pins: 4kV HBM
• Compatible with ISO11898-2
• Operating supply range: 3.0V to 3.6V
• Bus pin fault protection to ±20V
• Undervoltage lockout
This device can transmit and receive at bus speeds up to
5Mbps. It can drive a 40m cable at 1Mbps per the
ISO11898-2 specification. The device is designed to
operate over a common mode range of -7V to +12V, with
a maximum of 120 nodes. The device has three discrete
selectable driver rise/fall time options, a Listen mode
feature, and loopback test capability.
• Cold spare: powered down devices/nodes do not
affect active devices operating in parallel
• Three selectable driver rise and fall times:
• Fast speed (RS = 0V) - edges and propagation
delays optimized for a data rate of 1Mbps
The Receiver (Rx) inputs feature a “full fail-safe” design,
which ensures a logic high Rx output if the Rx inputs are
floating, shorted, or terminated but undriven.
• Medium speed (RS = 10kΩ) - edges and
propagation delays optimized for a data rate of
500kbps
The ISL72026ASEH is available in an 8 Ld hermetic
ceramic flatpack and die form that operate across the
temperature range of -55°C to +125°C.
• Slow Speed (RS = 50kΩ) - edges and propagation
delays optimized for a data rate of 250kbps
Other CAN transceivers available are the
ISL72027ASEH and ISL72028ASEH. For a list of
differences between these devices, see Table 1 on page 4.
• Glitch free bus I/O during power-up and power-down
• Full fail-safe (open, short, terminated/undriven)
receiver
Applications
• Satellites and aerospace communications
• Hi-Z input allows for 120 nodes on the bus
• High data rates: up to 5Mbps
• Telemetry data processing
• High-end industrial environments and harsh
environments
• Quiescent supply current: 7mA (max)
• Listen mode supply current: 2mA (max)
• -7V to +12V common mode input voltage range
• 5V tolerant logic inputs
Related Literature
• For a full list of related documents, visit our website
• ISL72026ASEH product page
• Thermal shutdown
• Acceptance tested to 75krad(Si) (LDR)
wafer-by-wafer
• Radiation tolerance
2
• SEL/B immune to LET : 86.4MeV•cm /mg
TH
• Low dose rate (0.01rad(Si)/s): 75krad(Si)
FN8861 Rev. 1.00
Jul 27, 2017
Page 1 of 28