DATASHEET
Radiation Hardened 5V 32-Channel Analog Multiplexer
ISL71831SEH
Features
The ISL71831SEH is a radiation tolerant, 32-channel
multiplexer that is fabricated using Intersil’s proprietary P6-SOI
process technology to provide excellent latch-up performance.
It operates with a single supply range from 3V to 5.5V and has
a 5-bit address line plus an enable that can be driven with
adjustable logic thresholds to conveniently select one of 32
available channels. An inactive channel is separated from the
active channel by a high impedance, which inhibits any
interaction between them.
• DLA SMD# 5962-15248
• Fabricated using P6 SOI process technology
• Rail-to-rail operation
• No latch-up
• Low rDS(ON). . . . . . . . . . . . . . . . . . . . . . . . . .<120Ω (maximum)
• Single supply operation . . . . . . . . . . . . . . . . . . . . . . 3V to 5.5V
- Adjustable logic threshold control
The ISL71831SEH’s low rDS(ON) allows for improved signal
integrity and reduced power losses. The ISL71831SEH is also
designed for cold sparing, making it excellent for redundancy
in high reliability applications. It is designed to provide a high
impedance to the analog source in a powered off condition,
making it easy to add additional backup devices without
incurring extra power dissipation. The ISL71831SEH also has
analog overvoltage protection on the input that disables the
switch during an overvoltage event to protect upstream and
downstream devices.
• Cold sparing capable. . . . . . . . . . . . . . . . . . . . . . . . -0.4V to 7V
• Analog overvoltage range . . . . . . . . . . . . . . . . . . . . -0.4V to 7V
• Switch input off leakage . . . . . . . . . . . . . . . . . . . . . . . . . 120nA
• Transition times (tAHL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70ns
• Internally grounded metal lid
• Break-before-make switching
• ESD protection ≥5kV (HBM)
• Operating temperature range. . . . . . . . . . . .-55°C to +125°C
The ISL71831SEH is available in a 48 Ld CQFP and operates
across the extended temperature range of -55°C to +125°C.
• Radiation tolerance
- Low dose rate (0.01rad(Si)/s) . . . . . . . . . . . . . . .75krad(Si)
- SEL/SEB LETTH (V+ = 6.3V). . . . . . . . . . . . . 60MeV•cm2/mg
There is also a 16-channel version available offered in a 28 Ld
CDFP. Refer to the ISL71830SEH datasheet for more
information. For a list of differences, refer to Table 1 on
page 2.
NOTE: All lots are assurance tested to 75krad (0.01rad(Si)/s)
wafer-by-wafer.
Applications
• Telemetry signal processing
• Harsh environments
• Down-hole drilling
Related Literature
• For a full list of related documents, visit our website
- ISL71831SEH product page
ISL71831SEH
90
80
+125°C
IN01
IN02
IN03
.
.
.
70
+25°C
60
50
40
OUT
ADC
IN32
30
-55°C
20
10
0
5
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
COMMON-MODE VOLTAGE (V)
ADDRESS
EN
FIGURE 1. TYPICAL APPLICATION
FIGURE 2. rDS(ON) vs COMMON-MODE VOLTAGE (V+ = 5V)
November 18, 2016
FN8759.2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2015, 2016. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1