DATASHEET
ISL71001M
6A Synchronous Buck Regulator with Integrated MOSFETs
The ISL71001M is a radiation tolerant and high
Features
efficiency monolithic synchronous buck regulator with
integrated MOSFETs. This single chip power solution
operates across an input voltage range of 3V to 5.5V and
provides a tightly regulated output voltage that is
externally adjustable from 0.8V to ~85% of the input
voltage with an output load current capacity of 6A. The
ISL71001M is available in a plastic 64 Ld Thin Quad
Flatpack (EP-TQFP) package.
• Passes NASA low outgassing specifications
• Operates from 3V to 5.5V supply
• Programmable power-on reset level
• Current mode control for excellent dynamic response
• Fixed 1MHz switching frequency
• ±1.2% reference voltage
The ISL71001M uses peak current-mode control for
excellent output load transient response and features
integrated compensation and switches at a fixed
frequency of 1MHz to reduce component size and count.
In applications where two regulators are needed, two
ISL71001M devices can be synchronized 180°
out-of-phase to reduce the overall input RMS ripple
current. The internal synchronous power switches are
optimized for high efficiency and good thermal
performance.
• Thermally enhanced heat-sink plastic package
• Highly efficient: 95% peak efficiency
• Bidirectional SYNC pin allows two devices to be
synchronized 180° out-of-phase
• Adjustable output voltage
• Analog soft-start
• Output undervoltage and output overcurrent
protection
The ISL71001M incorporates fault protection for the
regulator. The protection circuits include input
undervoltage, output undervoltage, and output
overcurrent.
• Power-good output voltage monitor
• Tin (Sn) free lead finish
• Characterized radiation level
• 30krad(Si) at a low dose rate
High integration makes the ISL71001M an ideal choice
to power many of today’s small form factor applications.
Two devices can be synchronized to provide a complete
power solution for large scale digital ICs, like Field
Programmable Gate Arrays (FPGAs), that require
separate core and I/O voltages.
2
• Single-event effects at LET = 43MeV•cm /mg
Applications
• FPGA, CPLD, DSP, CPU Core, or I/O voltages
• Low-voltage, high-density distributed power systems
• Low Earth Orbit (LEO) applications
• High altitude avionics
• Launch vehicles
100
95
90
85
80
75
3.3V
ISL71001M
SYNC
CORE
SYNC
I/O
FPGA
ISL71001M
LDO
AUX
3.3VIN
4
5VIN
70
0
1
2
3
5
6
IOUT (A)
Figure 2. Efficiency vs VIN for 2.5V Output, TC = +25°C
Figure 1. Typical Application
FN8926 Rev.2.3
Feb 15, 2023
Page 1 of 32
© 2017-2023 Renesas Electronics