DATASHEET
ISL6294
High Input Voltage Charger
FN9174
Rev 4.00
Jul 9, 2007
The ISL6294 is a cost-effective, fully integrated high input
voltage single-cell Li-ion battery charger. The charger uses a
CC/CV charge profile required by Li-ion batteries. The
charger accepts an input voltage up to 28V but is disabled
when the input voltage exceeds the OVP threshold, typically
6.8V, to prevent excessive power dissipation. The 28V rating
eliminates the overvoltage protection circuit required in a low
input voltage charger.
Features
• Complete Charger for Single-Cell Li-ion/Polymer Batteries
• Integrated Pass Element and Current Sensor
• No External Blocking Diode Required
• Low Component Count and Cost
• 1% Voltage Accuracy
The charge current and the end-of-charge (EOC) current are
programmable with external resistors. When the battery voltage
is lower than typically 2.55V, the charger preconditions the
battery with typically 20% of the programmed charge current.
When the charge current reduces to the programmable EOC
current level during the CV charge phase, an EOC indication is
provided by the CHG pin, which is an open-drain output. An
internal thermal foldback function protects the charger from any
thermal failure.
• Programmable Charge Current
• Programmable End-of-Charge Current
• Charge Current Thermal Foldback for Thermal
Protection
• Trickle Charge for Fully Discharged Batteries
• 28V Maximum Voltage for the Power Input
• Power Presence and Charge Indications
Two indication pins (PPR and CHG) allow simple interface to
a microprocessor or LEDs. When no adapter is attached or
when disabled, the charger draws less than 1µA leakage
current from the battery.
• Less Than 1µA Leakage Current off the Battery When No
Input Power Attached or Charger Disabled
• Ambient Temperature Range: -40°C to +85°C
• 8 Ld 2x3 DFN and 8 Ld SOIC Packages
• Pb-Free Plus Anneal Available (RoHS Compliant)
Ordering Information
PART
Applications
• Mobile Phones
• Blue-Tooth Devices
• PDAs
NUMBER
(Note)
PART
TEMP.
PACKAGE
(Pb-free)
PKG.
DWG. #
MARKING RANGE (°C)
ISL6294IRZ-T 94Z
-40 to +85 8 Ld 2x3 DFN L8.2x3
ISL6294IBZ
6294 IBZ
-40 to +85 8 Ld SOIC
-40 to +85 8 Ld SOIC
M8.15
M8.15
ISL6294IBZ-T 6294 IBZ
• MP3 Players
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
• Stand-Alone Chargers
• Other Handheld Devices
Pinouts
ISL6294
(8 LD DFN)
TOP VIEW
ISL6294
(8 LD SOIC)
TOP VIEW
BAT
8
7
VIN
1
2
VIN
BAT
1
2
3
4
8
7
6
5
IREF
PPR
PPR
CHG
EN
IREF
IMIN
GND
IMIN
GND
6
5
3
4
CHG
EN
FN9174 Rev 4.00
Jul 9, 2007
Page 1 of 9