ISL6265
®
Data Sheet
May 13, 2009
FN6599.1
Multi-Output Controller with Integrated
MOSFET Drivers for AMD SVI Capable
Mobile CPUs
Features
• Core Configuration Flexibility
- Dual Plane, Single-Phase Controllers
- Uniplane, Two-Phase Controller
The ISL6265 is a multi-output controller with embedded gate
drivers. A single-phase controller powers the Northbridge
(VDDNB) portion of the CPU. The two remaining controller
channels can be configured for two-phase or individual
single-phase outputs. For uniplane CPU applications, the
ISL6265 is configured as a two-phase buck converter. This
allows the controller to interleave channels to effectively
double the output voltage ripple frequency and thereby
reduce output voltage ripple amplitude with fewer
components, lower component cost, reduced power
dissipation, and smaller area. For dual-plane processors, the
ISL6265 can be configured as independent single-phase
controllers powering VDD0 and VDD1.
• Precision Voltage Regulators
- 0.5% System Accuracy Over-temperature
• Voltage Positioning with Adjustable Load Line and Offset
• Internal Gate Drivers with 2A Driving Capability
• Differential Remote CPU Die Voltage Sensing
• Core Differential Current Sensing: DCR or Resistor
• Northbridge Lossless rDS(ON) Current Sensing
• Serial VID Interface
- Two Wire Clock and Data Bus
- Supports High-Speed I2C
The heart of the ISL6265 is the patented R3 Technology™,
Intersil’s Robust Ripple Regulator modulator. Compared with
the traditional buck regulator, the R3 Technology™ has a
faster transient response. This is due to the R3 modulator
commanding variable switching frequency during a load
transient.
- 0.500V to 1.55V in 12.5mV Steps
- Supports PSI_L Power-Saving Mode
• Core Outputs Feature Phase Shedding with PSI_L
• Adjustable Output-Voltage Offset
• Digital Soft-Start of all Outputs
• User Programmable Switching Frequency
• Static and Dynamic Current Sharing (Uniplane Core)
• Overvoltage, Undervoltage, and Overcurrent Protection
• Pb-Free (RoHS Compliant)
The Serial VID Interface (SVI) allows dynamic adjustment of
the Core and Northbridge output voltages independently and
in combination from 0.500V to 1.55V. Core and Northbridge
output voltages achieve a 0.5% system accuracy
over-temperature.
A unity-gain differential amplifier is provided for remote CPU
die sensing. This allows the voltage on the CPU die to be
accurately regulated per AMD mobile CPU specifications.
Core output current sensing is realized using lossless
inductor DCR sensing. All outputs feature overcurrent,
overvoltage and undervoltage protection.
Pinout
ISL6265 (48 LD 6X6 TQFN)
TOP VIEW
48 47 46 45 44 43 42 41 40 39 38 37
Ordering Information
OFS/VFIXEN
PGOOD
PWROK
SVD
BOOT_NB
BOOT_0
UGATE_0
PHASE_0
PGND_0
LGATE_0
PVCC
1
2
36
35
34
33
32
31
30
29
28
27
26
25
PART NUMBER
(Note)
PART
MARKING
PACKAGE
(Pb-Free)
PKG.
DWG. #
TEMP (°C)
3
4
ISL6265HRTZ
ISL6265 HRTZ -10 to +100 48Ld6x6TQFN L48.6x6
SVC
5
ISL6265HRTZ-T* ISL6265 HRTZ -10 to +100 48 Ld 6x6 TQFN L48.6x6
Tape and Reel
ENABLE
RBIAS
OCSET
VDIFF_0
FB_0
49
GND
6
7
* Please refer to TB347 for details on reel specifications.
LGATE_1
PGND_1
PHASE_1
UGATE_1
BOOT_1
8
NOTE: These Intersil Pb-free plastic packaged products employ special
Pb-free material sets; molding compounds/die attach materials and 100%
matte tin plate PLUS ANNEAL - e3 termination finish, which is RoHS
compliant and compatible with both SnPb and Pb-free soldering
operations. Intersil Pb-free products are MSL classified at Pb-free peak
reflow temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
9
10
11
12
COMP_0
VW0
13 14 15 16 17 18 19 20 21 22 23 24
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008, 2009. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.