ISL6226
®
Data Sheet
August 2002
FN9078.1
Advanced PWM and Linear Power
Controller for Portable Applications
Features
• Provides Two Regulated Voltages
The ISL6226 provides power control and protection for two
user selected output voltages required in high-performance
notebook PC applications. The IC integrates a fixed,
selectable frequency pulse-width-modulation (PWM)
controller and a 3A LDO linear regulator controller with
monitoring and protection circuitry in a single 24 lead SSOP
package.
- Linear Regulator, User Selected, Current Limited
- High Efficiency PWM Over Wide Line and Load Range
- Synchronous Buck Converter on PWM Output
- Hysteretic Operation at Light Load
• Dual Mode Operation:
- Directly From Battery Input, V , of 5.6V to 24V or from
IN
The PWM controller regulates the battery input voltage to a
user selected output voltage. Synchronous converter and
hysteretic operation at light loads contribute to a high
efficiency over a wide range of input voltage and load
variation. Efficiency can be further enhanced by using the
V
of 5V
CC
• PWM Output Adjustable From 0.9V to 0.93*V
IN
• Low Drop-Out (LDO) Linear Regulator Operates from
Vout+0.5V to 24V
lower MOSFET’s r
as the current sense element. Input
• LDO Output Adjustable
DS(ON)
voltage feed-forward ramp modulation, current-mode control,
and internal feed-back compensation provide fast and stable
handling of input voltage load transients encountered in
advanced portable computer chip sets.
- From 0.8V to 3.8V at 0A to 3A for NPN Transistor
- From 0.8V to 3.0V at 0A to 3A for N-MOSFET
• 300/600kHz Switching Frequency Selectable
• Forced PWM Mode Control Option
• No Current-Sense Resistor Required on PWM Output
The internal linear regulator controller provides a user
selected high current output from an unregulated input with
user selected current limit.
- Uses MOSFET’s r
DS(ON)
- Optional Current-Sense Resistor for More Precision
• Separate Soft-Start For Both PWM and LDO
Ordering Information
PART
TEMP. RANGE
• Separate Enable Pins for both PWM and LDO for
Advanced Configuration and Power Interface (ACPI)
Compatibility
o
NUMBER
( C)
PACKAGE
PKG. NO.
ISL6226CA
-10 to 85
24 Ld SSOP
M24.15
ISL6226EVAL1
Evaluation Board
• Input Under voltage Lock-Out (UVLO) Protection
• Excellent Dynamic Response
Pinout
- Input Voltage Feed-Forward and Current-Mode Control
• Monitors Output Voltages and Provides PGOOD Status
• Thermal Shut-Down Protection
ISL6226 (SSOP)
TOP VIEW
VIN
1
2
3
4
5
6
7
8
9
24 VOUT
Applications
PGOODL
PWMEN
OCSET
LINEN
23 VSEN
22 FPWM
21 PGOODP
•
Mobile PCs
• Hand-Held Portable Instruments
20
ISEN
• Other Devices and Appliances With up to 24V Input
VCC
19 BOOT
18 UGATE
17 PHASE
16 SSPWM
15 PVCC
LINDR
LINCS1
LINCS2
Related Literature
• AN1013
SSLIN 10
LINVS 11
GND 12
14 LGATE
13
PGND
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
1