ISL59110
®
Data Sheet
August 8, 2005
FN6104.1
8MHz Rail-to-Rail Composite Video Driver
The ISL59110 is a single rail-to-rail 3-pole output
Features
• 3rd order 8MHz reconstruction filter
reconstruction filter with a -3dB roll-off frequency of 8MHz
and a slew rate of 40V/µs, with input signal DC restoration
accomplished with an internal sync tip clamp. Operating
from single supplies ranging from +2.5V to +3.6V and
sinking an ultra-low 2mA quiescent current, the ISL59110 is
ideally suited for low power, battery-operated applications. It
also features inputs capable of reaching down to 0.15V
below the negative rail. Additionally, an enable high pin shuts
the part down in under 14ns.
• 40V/µs slew rate
• Low supply current = 2mA
• Power-down current less than 3µA
• Supplies from 2.5V to 3.6V
• Rail-to-rail output
• Input to 0.15V below V -
S
• Input sync tip clamp
The ISL59110 is designed to meet the needs for micropower
and bandwidth required in battery-operated communication,
instrumentation, and modern industrial applications such as
video on demand, cable set-top boxes, DVD players, and
HDTV. The ISL59110 is offered in a space-saving SC-70
package guaranteed to a 1mm maximum height constraint
and specified for operation from -40°C to +85°C temperature
range.
• SAG correction reduces AC coupling capacitor size
• Pb-free plus anneal available (RoHS compliant)
Applications
• Video amplifiers
• Portable and handheld products
• Communications devices
• Video on demand
• Cable set-top boxes
• Satellite set-top boxes
• DVD players
Ordering Information
PART NUMBER
PACKAGE
TAPE &
REEL
(See Note)
(Pb-Free)
PKG. DWG. #
ISL59110IEZ-T7
6-Pin SC-70
7” (3K pcs)
P6.049A
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
• HDTV
• Personal video recorders
Pinout
ISL59110
(6-PIN SC-70)*
TOP VIEW
IN+
GND
SAG
1
2
3
LPF
6
5
4
VS+
EN
+
-
OUT
*1mm MAXIMUM HEIGHT GUARANTEED
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2005. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.