ISL54405
®
Data Sheet
June 5, 2008
FN6699.1
CD/MP3 Quality Stereo 2:1 Multiplexer
with Click and Pop Elimination
Features
• Clickless Audio Switching
• 2V Signal Switching from 3.3V or 5V Supply
The Intersil ISL54405 is a single supply, bidirectional, dual
single-pole/double-throw (SPDT) ultra low distortion, high
OFF-Isolation analog switch that can pass analog signals that
are positive and negative with respect to ground. It is primarily
targeted at consumer and professional audio switching
applications such as Computer Sound Cards and Home
Theater products. The inputs can accommodate ground
RMS
• -106dB THD+N into 20kΩ Load @ 2V
RMS
• -108dB THD+N into 32Ω Load @ 3.9mW
• Signal to Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >124dBV
• ±0.01dB Insertion Loss at 1kHz, 20kΩ Load
• ±0.007dB Gain Variation 20Hz to 20kHz
• 125dB Signal Muting into 20kΩ Load
referenced signals up to 2V
while operating from a single
RMS
3.3V or 5V DC supply. The digital logic inputs are 1.8V
logic-compatible when using a single 3.3V or 5V supply. It can
be used in both AC or DC coupled ground referenced
applications.
• 90dB PSRR 20Hz to 20kHz
• Single Supply Operation . . . . . . . . . . . . . . . . . . . . 3.3V or 5V
• Available in 16 Ld TSSOP, 16 Ld TQFN, and 16 Ld µTQFN
• Pb-Free (RoHS Compliant)
The ISL54405 features a soft-switch feature and click/pop
circuitry at each signal pin that eliminates clicks and pops
associated with power-up/down conditions of the preceding
amplifier outputs.
Applications
With -106dB THD+N performance with a 2V
RMS
signal into
• Computer Sound Cards
20kΩ load, superior signal muting, high PSRR and very flat
frequency response the ISL54405 meets the exacting
requirements of consumer and professional audio engineers.
• Home Theater Audio Products
• SACD/DVD Audio
The ISL54405 is available in 16 Ld TSSOP, 16 Ld 3mmx3mm
TQFN, and 16 Ld 2.6mmx1.8mm µTQFN packages. Its
specified for operation over the -40°C to +85°C temperature
range.
• DVD Player Audio Output Switching
• Headsets for MP3/Cellphone Switching
• Hi-Fi Audio Switching Application
TABLE 1. FEATURES AT A GLANCE
ISL54405
Block Diagram
5V_Supply
ISL54405
VDD
Number of Switches
Switch Type
2
SPDT or 2 to 1 MUX
±0.01dB
DIR_SEL
CAP_SS
LOGIC
AND
CLICK/POP
CONTROL
AC/DC
MUTE
SEL
Insertion Loss
THD+N, 2V
, 20kΩLoad
-106dB
RMS
L1
L2
OFF-Isolation (MUTE)
125dB
L
Packages
16 Ld TSSOP, 16 Ld 3x3 TQFN,
16 Ld 2.6x1.8 µTQFN
R1
R2
R
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
GND
• Application Note AN557 “Recommended Test Procedures
for Analog Switches”
For 5V operation connect the 5V_Supply pin to 5V and float the
VDD pin. For 3.3V operation connect the VDD pin to 3.3V and float
the 5V_Supply pin.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.