DATASHEET
ISL54405
FN6699
Rev 2.00
May 6, 2014
CD/MP3 Quality Stereo 2:1 Multiplexer with Click and Pop Elimination
The Intersil ISL54405 is a single supply, bidirectional, dual
Features
single-pole/double-throw (SPDT) ultra low distortion, high
• Clickless audio switching
• 2 switches
• Switch type SPDT or 2 to 1 MUX
• 2V signal switching from 3.3V or 5V supply
OFF-Isolation analog switch that can pass analog signals that
are positive and negative with respect to ground. It is primarily
targeted at consumer and professional audio switching
applications such as computer sound cards and home theater
products. The inputs can accommodate ground referenced
RMS
• -106dB THD+N into 20k load at 2V
signals up to 2V
while operating from a single 3.3V or 5V DC
RMS
RMS
supply. The digital logic inputs are 1.8V logic-compatible when
using a single 3.3V or 5V supply. It can be used in both AC or DC
coupled ground referenced applications.
• -108dB THD+N into 32 load at 3.9mW
• Signal to noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >124dBV
• ±0.01dB insertion loss at 1kHz, 20k load
• ±0.007dB gain variation 20Hz to 20kHz
• 125dB signal muting into 20k load
The ISL54405 features a soft-switch feature and click/pop
circuitry at each signal pin that eliminates clicks and pops
associated with power-up/down conditions of the preceding
amplifier outputs.
• 90dB PSRR 20Hz to 20kHz
With -106dB THD+N performance with a 2V
RMS
signal into
• Single supply operation . . . . . . . . . . . . . . . . . . . . . . . . . 3.3V or 5V
• Available in 16 Ld TSSOP, 16 Ld TQFN, and 16 Ld µTQFN
• Pb-Free (RoHS compliant)
20k load, superior signal muting, high PSRR and very flat
frequency response, the ISL54405 meets the exacting
requirements of consumer and professional audio engineers.
The ISL54405 is available in 16 Ld TSSOP, 16 Ld 3mmx3mm
TQFN, and 16 Ld 2.6mmx1.8mm µTQFN packages. It’s specified
for operation over the -40°C to +85°C temperature range.
Applications
• Computer sound cards
• Home theater audio products
• SACD/DVD audio
Related Literature
• TB363 “Guidelines for Handling and Processing Moisture
Sensitive Surface Mount Devices (SMDs)”
• DVD player audio output switching
• Headsets for MP3/cellphone switching
• Hi-Fi audio switching application
• AN557 “Recommended Test Procedures for Analog
Switches”
5V_Supply
VDD
ISL54405
LOGIC
AND
CLICK/POP
CONTROL
DIR_SEL
CAP_SS
AC/DC
MUTE
SEL
L1
L2
L
R1
R2
R
GND
For 5V operation connect the 5V_Supply pin to 5V and float the
VDD pin. For 3.3V operation connect the VDD pin to 3.3V and float
the 5V_Supply pin.
FIGURE 1. ISL54405 BLOCK DIAGRAM
FN6699 Rev 2.00
May 6, 2014
Page 1 of 20