ISL54302
®
Data Sheet
March 19, 2008
FN6592.0
12V, 1.5Ω Quad SPST Switch with Latched
Parallel Interface
Features
• 4 independently controlled SPST switches
• ON-resistance @ 12V. . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5Ω
• Single or split supply voltage operation
The ISL54302 is a quad analog bidirectional switch device
targeted at industrial applications, including test and
measurement equipment. It features low resistance and low
leakage along with 12V operation and can be digitally
controlled via a latched parallel interface. This parallel
interface features a latch input pin that can be used to connect
multiple devices into a parallel arrangement.
• r
• r
flatness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <1Ω
matching between channels . . . . . . . . . . . . . . . . . <0.2Ω
ON
ON
• Turn-on/Turn-off time . . . . . . . . . . . . . . . . . . . . . . . 25ns/80ns
• Switch bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60MHz
• Parallel data interface up to 40MHz
• 3V logic interface
The ISL54302 can operate from a single, or split bipolar
power supply and has a 3V logic interface. The ISL54302 is
specified for use over the -40°C to +85°C temperature range
and is available in a 20 Ld 4x4 QFN Pb-free package.
• 20 Ld QFN package
Table 1 summarizes the performance of this family.
• Pb-free (RoHS compliant)
TABLE 1. FEATURES AT A GLANCE
CONFIGURATION
QUAD SPST
1.5Ω
Related Literature
• TB363 “Guidelines for Handling and Processing Moisture
Sensitive Surface Mount Devices (SMDs)”
r
ON
t
/t
ON OFF
25ns/80ns
20 Ld QFN 4x4
• TB389 “PCB Land Pattern and Surface Mount Guidelines
for QFN Packages”
Package
• AN557 “Recommended Test Procedures for Analog
Switches”
Pinout
ISL54302
(20 LD QFN)
TOP VIEW
Ordering Information
PART
NUMBER
(Note)
TEMP.
RANGE
(°C)
PART
MARKING
PACKAGE
(Pb-free)
PKG.
DWG. #
20 19 18 17 16
ISL54302IRZ* 54 302IRZ -40 to +85 20 Ld 4x4 QFN L20.4x4C
1
2
3
4
5
15
14
13
12
11
2B
3A
3B
4A
4B
NC
*Add “-T” for tape and reel. Please refer to TB347 for details on reel
specifications.
2A
1B
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets; molding compounds/die attach
materials and 100% matte tin plate PLUS ANNEAL - e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
1A
CS-LATCH
6
7
8
9
10
ISL54302 Block Diagram
VLOGIC
VPLUS
VDD
LATCHES
S1-CTRL
1 OF 4
S2-CTRL
SW-A
S3-CTRL
S4-CTRL
LEVEL
SHIFTER
SW-B
GND
VSS
VSS
CS-LATCH
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.