DATASHEET
ISL54220
High-Speed USB 2.0 (480Mbps) Multiplexer
FN6819
Rev 1.00
February 4, 2010
The Intersil ISL54220 is a single supply dual 2:1
multiplexer that can operate from a single 2.7V to
5.5V supply. It contains two SPDT (Single Pole/Double
Throw) switches configured as a DPDT. The part was
designed for switching or routing of USB High-Speed
signals and/or USB Full-speed signals in portable
battery powered products.
Features
• High-Speed (480Mbps) and Full-Speed (12Mbps)
Signaling Capability per USB 2.0
• 1.8V Logic Compatible (2.7V to +3.6V supply)
• Enable Pin to Open all Switches
• Power OFF Protection
The 6switches can swing rail-to-rail and were
specifically designed to pass USB full speed data
signals that range from 0V to 3.3V and USB high
speed data signals that range from 0V to 400mV.
They have high bandwidth and low capacitance to
pass USB high-speed data signals with minimal
distortion.
• D-/D+ Pins Overvoltage Tolerant to 5.5V
• -3dB Frequency. . . . . . . . . . . . . . . . . . . 742MHz
• Low ON Capacitance @ 240MHz . . . . . . . . 4.2pF
• Low ON-Resistance @ VDD = 5.5V . . . . . . . 4.5
• Low ON-Resistance @ VDD = 3.3V . . . . . . . 6.0
• Single Supply Operation (V ) . . . . . 2.7V to 5.5V
DD
• Available in µTQFN, TDFN, and MSOP Packages
• Pb-Free (RoHS Compliant)
The digital logic inputs are 1.8V logic compatible when
operated with a 2.7V to 3.6V supply. The ISL54220
has an output enable pin to open all the switches.
The ISL54220 is available in 10 Ld 1.8mmx1.4mm
µTQFN, 10 Ld TDFN and 10 Ld MSOP packages. It
operates over a temperature range of -40 to +85°C.
• Compliant with USB 2.0 Short Circuit and
Overvoltage Requirements Without Additional
External Components
Related Literature
Applications*(see page 15)
• MP3 and other Personal Media Players
• Cellular/Mobile Phones
• PDA’s
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount
Devices (SMDs)”
• Application Note AN1449 “ISL54220IRUEVAL1Z
Evaluation Board User’s Manual”
• Digital Cameras and Camcorders
• USB Switching
Application Block Diagram
USB 2.0 HS Eye Pattern With
Switches In The Signal Path
µCONTROLLER
V
DD
ISL54220
OE
SEL
LOGIC
USB
HIGH-SPEED
OR
FULL-SPEED
TRANSCEIVER
VBUS
D-
HSD1-
D-
HSD1+
HSD2-
USB
D+
D+
HIGH_SPEED
OR
FULL-SPEED
TRANSCEIVER
HSD2+
GND
GND
TIME SCALE (0.2ns/DIV)
PORTABLE MEDIA DEVICE
FN6819 Rev 1.00
February 4, 2010
Page 1 of 18