DATASHEET
ISL32613E, ISL32614E
±16.5kV ESD Protected, +125°C, 1.8V to 3.6V, Low Power, SOT-23,
RS-485/RS-422 Transmitters
FN7906
Rev.4.01
Sep 27, 2019
The ISL32613E and ISL32614E are ±16.5kV HBM ESD
Features
protected (7kV IEC61000 contact), 1.8V powered, single
• Wide supply voltage range . . . . . . . . . . . . . . . . . . 1.8V to 3.6V
transmitters for differential communication. These drivers
have very low bus currents (±40µA), so they present less than
a 1/8 unit load to the bus. The low bus currents allow more
than 256 transmitters on the network without violating the
RS-485 specification’s 32 unit load maximum and without
using repeaters.
• Low quiescent supply current. . . . . . . . . . . . . . . . 80µA (max)
- Very low shutdown supply current . . . . . . . . . . . 2µA (max)
• High ESD protection on RS-485 outputs . . . . ±16.5kV HBM
- Class 3 ESD level on all other pins. . . . . . . . . . . >8kV HBM
Hot plug circuitry ensures that the Tx outputs remain in a high
impedance state while the power supply stabilizes.
• Specified for +125°C
• Hot plug - Tx outputs remain three-state during power-up
• Low Tx leakage allows >256 devices on the bus
• Slew rate limited for data rates up to 256kbps
Both ICs use slew rate limited drivers, which reduce EMI and
minimize reflections from improperly terminated transmission
lines or unterminated stubs in multidrop and multipoint
applications. The ISL32613E is more slew rate limited for data
rates up to 128kbps, while the less limited ISL32614E is
useful for data rates up to 256kbps.
• Current limiting and thermal shutdown for driver overload
protection
• 5V tolerant logic inputs
For companion low power single RS-485 receivers, see the
ISL32610E datasheet.
• Pb-Free (RoHS Compliant)
Applications
• Industrial/process control networks
Related Literature
For a full list of related documents, visit our website:
• Space-constrained systems
• ISL32613E and ISL32614E device pages
• Factory automation
• Building environmental control/lighting systems
R
= ∞, C = 50pF
D
D
Truth Table
10m
1m
TRANSMITTING
INPUTS
DE (Note 9)
OUTPUTS
DYNAMIC (128kbps)
DI
1
Z
Y
1
0
1
1
0
STATIC
1
0
100µ
10µ
0
X
High-Z *
High-Z *
NOTE: *Shutdown Mode
1.8
2.0
2.2
2.4
2.6
2.8
(V)
3.0
3.2
3.4
3.6
V
CC
FIGURE 1. ISL32613E WITH V = 1.8V REDUCES OPERATING
CC
I
BY A FACTOR OF 177 COMPARED WITH I AT
CC
CC
V
= 3.6V
CC
FN7906 Rev.4.01
Sep 27, 2019
Page 1 of 12