®
IS24C32-2/3
IS24C64-2/3
65,536-bit/32,768-bit 2-WIRE SERIAL
CMOS EEPROM
ISSI
PRELIMINARY INFORMATION
APRIL 2001
FEATURES
• Low Power CMOS Technology
• 8-pin PDIP and 8-pin SOIC packages
• Self time write cycle with auto clear
– Standby Current less than 10 µA (5.5V)
– Read Current (typical) less than 1 mA (5.5V)
– Write Current (typical) less than 3 mA (5.5V)
• Low Voltage Operation
– 5 ms @ 2.5V
• Organization:
– IS24C64-2 and IS24C64-3: 8192x8
– IS24C32-2 and IS24C32-3: 4096x8
• 32-Byte Page Write Buffer
• Two-Wire Serial Interface
– Bi-directional data transfer protocol
• HighReliability
– IS24C64-2 & IS24C32-2: Vcc = 1.8V to 5.5V
– IS24C64-3 & IS24C32-3: Vcc = 2.5V to 5.5V
• 100 KHz (1.8V) and 400 KHz (5V) Compatibility
• Hardware Data Protection
– Write Protect Pin
• Sequential Read Feature
– Endurance: 1,000,000 Cycles
– Data Retention: 100 Years
• Commercial and Industrial temperature ranges
• Filtered Inputs for Noise Suppression
PRODUCT OFFERING OVERVIEW
Part No
Voltage
1.8V-5.5V
2.5V-5.5V
1.8V-5.5V
2.5V-5.5V
Speed
Standby ICC
< 5 µA
Read ICC
1 mA
Write ICC
3 mA
Temperature
IS24C64-2
IS24C64-3
IS24C32-2
IS24C32-3
100 KHz
400 KHz
100 KHz
400 KHz
C,I
C,I
C,I
C,I
< 10 µA
< 5 µA
1 mA
3 mA
1 mA
3 mA
< 10 µA
1 mA
3 mA
DESCRIPTION
The IS24C64-2 is a 1.8V (1.8V-5.5V) 64K-bit (8192 x 8)
Electrically Erasable PROM, IS24C64-3 is a 2.5V (2.5V-
5.5V) 64K-bit (8192 x 8) Electrically Erasable PROM,
IS24C32-2 is a 1.8V (1.8V-5.5V) 32K-bit (4096 x 8)
Electrically Erasable PROM and the IS24C32-3 is a 2.5V
(2.5V-5.5V) 32K-bit (4096 x 8) Electrically Erasable
PROM.
The IS24CXX (IS24C64-2, IS24C64-3, IS24C32-2 and
IS24C32-3) family is a low-cost and low voltage 2-wire
Serial EEPROM. It is fabricated using ISSI’s advanced
CMOS EEPROM technology and provides a low power
and low voltage operation. The IS24CXX family features
a write protection feature, and is available in 8-pin DIP and
8-pin SOIC packages.
This document contains PRELIMINARY INFORMATION data. ISSI reserves the right to make changes to its products at any time without notice in order to improve design and supply the
best possible product. We assume no responsibility for any errors which may appear in this publication. © Copyright 2001, Integrated Silicon Solution, Inc.
Integrated Silicon Solution, Inc. — 1-800-379-4774
PRELIMINARY INFORMATION Rev. 00B
1
04/04/01