Image Reject Mixer /
Model IRM5xMS-1
SSB Modulator
RF 5.6 to 9.0 GHz
Communications Band
(1)
Electrical Specifications
:
Model IRM5xMS-1
Conditions
Specifications
Parameter
Typical
5.0 dB
Max
6.0 dB
RF(GHz)
5.6-9.0
LO(GHz) IF(MHz) Min
SSB Conversion
5.6-9.0
50-90
loss:(2) (3)
LO Power
Image Rejection Sideband
Suppression:(4)
Isolation
26 dB
23 dB
5.8-8.8
5.6-9.0
5.8-8.8
5.6-9.0
70
50-90
17 dB
16 dB
4 = +10 dBm
6 = +13 dBm
7 = +17 dBm
LO to RF:
LO to I/Q:
RF to I/Q:
I/Q to RF:
31 dB
40 dB
26 dB
40 dB
+5 dBm
+8 dBm
+12 dBm
+14 dBm
+17 dBm
+21 dBm
+10 dBm
+13 dBm
+17 dBm
5.6-9.0
5.6-9.0
25 dB
25 dB
5.6-9.0
5.6-9.0
50-90
50-90
Input 1 dB
Compression Point:
MIQ54
MIQ56
MIQ57
MIQ54
MIQ56
MIQ57
MIQ54
MIQ56
MIQ57
5.6-9.0
5.6-9.0
5.6-9.0
Input Third Order
Intercept Point:
5.6-9.0
5.6-9.0
50-90
50-90
(5)
LO Power:
Notes:
1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the
nominal LO power. Specifications indicated as typical are not guaranteed.
2. Noise Figure is typically within ±0.5 dB of conversion loss.
3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C.
4. Measured with an IF quadrature hybrid whose amplitude and phase errors are 0.5 dB and 3 degrees maximum.
5. Usable LO drives are up to 2 dB below to 3 dB above nominal.
6. See Application notes M112, for aid in selecting the outline and for mounting and installation information.
Typical Performance at 25˚C
Outline: MSR7
IRM5xMS-1
5.0
All dimensions are in inches and [mm].
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532
Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001
www.SpectrumMicrowave.com