IRIS-A6131
INTEGRATED SWITCHER
Features
•Small sized 8-pin DIP type full molded package, optimum IC for low-
height SMPS
•Off-timer circuit is provided on the monolithic control IC
• Low start-up circuit current (10uA max)
Package Outline
•Low circuit current at operation (1.5mA typ)
• Avalanche energy guaranteed MOSFET with high VDSS
ꢀ
The built-in power MOSFET simplifies the surge absorption
circuit since the MOSFET guarantees the avalanche energy.
ꢀ
No VDSS de-rating is required.
•Built-in Start-up circuit (the power loss in the start-up circuit is
reduced by cutting off the start-up circuit after the IC starts its
operation.)
•Auto Burst Stand-by (realizing input power<0.1W at no load)
•Auto Bias Function (stable burst operation without the interference on
transformer)
•Two operational modes by auto switching functions
ꢀ For normal operation: PRC mode
ꢀ For stand-by operation (at light load): Burst mode
•Built-in Leading Edge Blanking Function
• Built-in constant voltage drive circuit
8 Lead PDIP
ꢀ
ꢀ
ꢀ
ꢀ
Various kinds of protection functions
Pulse-by-pulse Overcurrent Protection (OCP)
Overvoltage Protection with latch mode (OVP)
Thermal Shutdown with latch mode (TSD)
Key Specifications
MOSFET
VDSS(V)
RDS(ON)
MAX
Pout(W)
Note 1
Type
ACinput(V)
IRIS-A6131
500
3.95
100/120 15%
10
Ω
±
Descriptions
IRIS-A6131 is a hybrid IC consisting of a power MOSFET and a controller IC, designed for PRC
fly-back converter type SMPS (Switching Mode Power Supply) applications, applicable for PRC
operation for small power SMPS. This IC realizes downsizing and standardizing of a power supply
system reducing external component count and simplifying the circuit design.
Note: PRC is abbreviation for “Pulse Ratio Control” (On-width control with fixed OFF-time).
Typical Connection Diagram
8
7
6
5
Startup
D
D
NC
IRIS-A6131
OCP Vcc GND FB
1
2
3
4
Note 1: The pout (W) represents the thermal rating at PRC Operation. The peak power output is obtained by
approximating 120 to 140% of the above listed value. When the output voltage is low and ON-duty is narrow, the
Pout (W) shall become lower than that of above value.
www.irf.com
1