Datasheet > IRDCIP2001-B

IRDCIP2001-B

更新时间： 2024-11-09 03:44:31

品牌	Logo	应用领域
英飞凌 - INFINEON		转换器
页数	文件大小	规格书
8页	649K
描述
IRDCiP2001-B, 500kHz, 60A, 3-phase Synchronous Buck Converter using iP2001

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

IRDCIP2001-B 数据手册

IRDCiP2001-B

EFERENCE

ESIGN

International Rectifier 233 Kansas Street, El Segundo, CA 90245 USA

•

IRDCiP2001-B, 500kHz, 60A, 3-phase Synchronous Buck

Converter using iP2001

Overview

In this document, table 1 and figure 1 are provided to enable engineers to

easily evaluate the iP2001 in a 3-phase configuration that is capable of

providing up to 60A in a lab environment without airflow. Figures 3, 4, 5 and

6 and the complete bill of materials in table 2 are provided as a reference

design to enable engineers to very quickly and easily design a 3-phase

converter. In order to optimize this design to your specific requirements

refer to the data sheet for the controller listed in the bill of materials. A variety

of other controllers may also be used, but the design will require layout and

control circuit modifications.

Demoboard Quick Start Guide

Initial Settings:

z The output is set to 1.7V, but can be adjusted from 1.1 to 1.85V by setting

S1 according to the VID codes provided in Table 1. Droop control is set to 50mV at 60A, but can be adjusted by

following the instructions in the data sheet for the PWM controller.

z The switching frequency per phase is set to 500kHz with the frequency set resistor R4. This creates an effective

output frequency of 1.5MHz. The graph in figure 1 shows the relationship between R4 and the switching frequency

per phase. This frequency may be adjusted by changing R4 according to this graph; however, extreme changes

from the 500kHz set point may require redesigning the control loop and adjusting the values of input and output

capacitors. Also, refer to the SOA graph in the iP2001 datasheet for maximum operating current at different

frequencies.

Procedure for Connecting and Powering Up Demoboard:

1. Apply input voltage (5-12V) across V_IN(TP18) and PGND (TP14). Note that this input source must be applied first during

the power-up sequence.

2. Apply +5V logic power across +5V (TP19) and PGND (TP20).

3. Apply load across VOUT pads (TP10 - TP12) and PGND pads (TP14 - TP16)

4. Set ENABLE high.

5. Monitor switch node signals (optional) via TP6 - TP8.

6. Adjust load accordingly.

iP2001 Recommended Operating Conditions

(refer to the iP2001 datasheet for maximum operating conditions)

Input voltage:

5 - 12V

Output voltage:

Output current:

Switching Freq:

1.1 - 1.85V

20A per phase, 60A total for 3-phase demo board.

500kHz per phase, 1.5MHz effective output frequency.

07/19/02

12 3 4 5 6 7 8

中文翻译

下载PDF

与IRDCIP2001-B相关器件

型号	品牌	获取价格	描述	数据表
IRDCIP2001-C	INFINEON	获取价格	IRDCiP2001-C, 500kHz, 80A, 4-phase Synchronous Buck Converter using iP2001
IRDCIP2002-C	INFINEON	获取价格	1MHz, 120A, 4-phase Synchronous Buck Converter using iP2002
IRDCIP2003A-C	INFINEON	获取价格	1MHz, 160A, Synchronous Buck Converter Using iP2003A
IRD-L67130L-55	TEMIC	获取价格	Dual-Port SRAM, 1KX8, 55ns, CMOS, PQFP64, VQFP-64
IRD-L67130L-70	TEMIC	获取价格	Dual-Port SRAM, 1KX8, 70ns, CMOS, PQFP64, VQFP-64
IRD-L67130V-45	TEMIC	获取价格	Dual-Port SRAM, 1KX8, 45ns, CMOS, PQFP64, VQFP-64
IRD-L67130V-55	TEMIC	获取价格	Dual-Port SRAM, 1KX8, 55ns, CMOS, PQFP64, VQFP-64
IRD-L67130V-70	TEMIC	获取价格	Dual-Port SRAM, 1KX8, 70ns, CMOS, PQFP64, VQFP-64
IRD-L67132L-45	TEMIC	获取价格	Dual-Port SRAM, 2KX8, 45ns, CMOS, PQFP64, VQFP-64
IRD-L67132V-45	TEMIC	获取价格	Dual-Port SRAM, 2KX8, 45ns, CMOS, PQFP64, VQFP-64

与IRDCIP2001-B相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

22
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

21
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

47
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

39

产品中心

服务支持

精选活动

关于我们

帮助中心

IRDCIP2001-B

IRDCIP2001-B 数据手册

与IRDCIP2001-B相关器件

与IRDCIP2001-B相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

IRDCIP2001-B

IRDCIP2001-B 数据手册

与IRDCIP2001-B相关器件

与IRDCIP2001-B相关文章

您还可以找

您在本页遇到什么问题？