Data Sheet No. PD60198-C
IR2166(S)
PFC & BALLAST CONTROL IC
Features
PFC, Ballast control and half-bridge driver in one IC
Programmable dead time
Internal ignition ramp
Internal fault counter
DC bus under-voltage reset
Shutdown pin with hysteresis
Internal 15.6V zener clamp diode on Vcc
Micropower startup (150µA)
Latch immunity and ESD protection
•
•
Critical conduction mode boost type PFC
No PFC current sense resistor required
Programmable preheat frequency
Programmable preheat time
Programmable run frequency
Programmable over-current protection
•
•
•
•
•
•
•
•
•
•
•
•
Programmable end-of-life protection
•
•
Description
Packages
The IR2166 is a fully integrated, fully protected 600V ballast control IC designed to
drive all types of fluorescent lamps. PFC circuitry operates in critical conduction mode
and provides for high PF, low THD and DC Bus regulation. The IR2166 features in-
clude programmable preheat and run frequencies, programmable preheat time, pro-
grammable dead-time, programmable over-current protection, and programmable end-
of-life protection. Comprehensive protection features such as protection from failure of
a lamp to strike, filament failures, end-of-life protection, DC bus undervoltage reset as
well as an automatic restart function, have been included in the design. The IR2166 is
available in both 16-lead PDIP and 16-lead (narrow body) SOIC packages.
16-Lead SOIC
(narrow body)
16-Lead PDIP
IR2166 Application Diagram
D BUS
+ Rectified AC Line
R BUS
RSUPPLY
CVDC
RGHS
VBUS
CPH
HO
VS
VB
1
2
3
4
5
67
7
8
16
15
14
M1
RVDC
CPH
CBLOCK LRES
+
CBOOT
DBOOT
CVCC2
RGLS
RT
CBUS
RT
RPH
CSNUB
VCC
DCP1
13
12
R5
RPH
CT
CVCC1
COM
CT
R3
CRES
R6
CCOMP
COMP
LO
M2
11
10
9
DCP2
R7
R2
D1
R1
ZX
CS
DZCOMP
R4
PFC
SD/EOL
M3
RGPFC
RCS
CSD1
CCS CSD2
D2 D3
CEOL
R8
- Rectified AC Line
*Please note that this data sheet contains advanced information that could change before the product is released to production.
www.irf.com
1