PD-60022F
IR2130D
3-PHASE DRIVER
Features
Hermetic
Product Summary
Floating channel designed for bootstrap operation
Fully operational to +400V
VOFFSET
400V max.
100mA / 100mA
10 - 20V
IO+/-
Tolerant to negative transient voltage
dV/dt immune
VOUT
Gate drive supply range from 10 to 20V
Under voltage lockout for all channels
Over-current shutdown turns off all six drivers
Independent half-bridge drivers
Matched propagation delay for both channels
Outputs in phase with inputs
t
on/off (typ.)
675ns & 425ns
0.9µs
Dead time (typ.)
Description
The IR2130D is a high voltage, high speed power MOSFET
and IGBT driver with three independent high and low side
referenced output channels. Proprietary HVIC technology
enables ruggedized monolithic construction. Logic inputs are
compatible with 5V CMOS or LSTTL outputs. A ground-
referenced operational amplifier provides analog feedback of
bridge current via an external current sense resistor. A
current trip function which terminates all six outputs is also
An open drain FAULT signal indicates if an over current
or under voltage shutdown has occurred. The output
driver features a high pulse current buffer stage
designed for minimum driver cross-conduction.
Propagation delays are matched to simplify use at high
frequencies. The floating channels can be used to drive
N-channel power MOSFETs or IGBTs in the high side
configuration which operate up to 400 volts.
Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device mayoccur. All voltage parameters
are absolute voltages referenced to Vso. The Thermal Resistance and Power Dissipation ratings are measured under
board mounted and still air conditions.
Symbol
Min.
-0.3
Max.
VS1,2,3 + 20
VSO + 400
VS1,2,3 + 0.3
20
Units
Parameter
High Side Floating Supply Absolute Voltage
High Side Floating Supply Offset Voltage
High Side Output Voltage
VB1,2,3
VS1,2,3
VHO1,2,3
VCC
VSO - 5
VS1,2,3 - 0.3
-0.3
Low Side Fixed Supply Voltage
VSO
Low Side Driver Return
-5
VSO - 0.3
-0.3
VCC + 0.3
VCC + 0.3
VCC + 0.3
VCC + 0.3
VCC + 0.3
VCC + 0.3
50
V
VLO1,2,3
VIN
Low Side Output Voltage
Logic Input Voltage (HIN, LIN & SD)
Fault Output Voltage
VFLT
-0.3
VCAO
Operational Amplifier Output Voltage
Operational amplifier Inverting Input Voltage
Allowable Offset Supply Voltage Transient (Fig. 16)
Package Power Dissipation @ TA ≤ 25°C (Fig. 19)
Thermal Resistance, Junction to Ambient
Junction Temperature
-0.3
-
VCA
-0.3
dVS/dt
PD
–––
V/ns
W
–––
1.5
RthJA
Tj
–––
70
°C/W
-55
125
TS
TL
Storage Temperature
-55
150
300
°C
g
Lead Temperature (Soldering, 10 seconds)
Weight
–––
6.1 (typical)
1
2018-10-30
International Rectifier HiRel Products, Inc.