IPSUAT Series
Intrinsically Safe Pressure Transducer
Approvals:-
ATEX / IECEx
EII Ex ia IIC T4 Ga Ta (see schedule)
Piezo-resistive thick film ceramic sensor
Stainless steel body
Accuracy < 0.25% FS BFSL
Pressure ranges from vacuum to 5800psi
The IPSUAT series is ideally suited for use in a wide range of industrial applications in hazardous
areas. The probe uses a piezo-resistive ceramic sensor, giving excellent media compatibility within
a stainless steel housing
The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving
stable electronics, especially industrial applications.
Each device is temperature compensated, calibrated and supplied with a traceable serial number
and calibration certificate.
Performance
Electrical Protection
Supply reverse polarity
Electromagnetic compatibility
Mechanical Stability
Shock
Accuracy (Non-Linearity & Hysteresis) <± ±.25% / FS (BFSL)
No damage but also no function
CE Compliant
Setting Errors (offsets)
Material Specifications
Housing
Zero & Full Scale, <± ±.5% / FS
1±±g / 11s
1±g RMS (2± - 2±±±Hz)
316 Stainless Steel
Viton
Vibration
“O” ring seals
Environment & Thermal Effects
Operating Temperature
Storage temperature
Compensated temperature range
Thermal Zero Shift (TZS)
Thermal Span Shift
Diaphragm
Media wetted parts
Ceramic Al2O3 96%
Housing & connection, “O” ring seal,
diaphragm
-2±ºC to +12±ºC
-4±ºC to +11±ºC
+2±ºC to +8±ºC
<± ±.±4% /FS/ºC
<± ±.±15% /ºC
-2±ºC to +6±ºC
with patm ±.8 to 1.1 bar
Weight
Approx 1±±g
Installation position
Operational Life
Insulation resistance
Any
> 1±±x 1±6 cycles
> 5±MOhms at 5±Vdc
Permissible environment zone ±
Pressure Ranges
Nominal Pressure, Gauge, psi
Compound range
Permissible Overpressure psi
Burst Pressure psi
15
-15 to ± -15 to 3± -15 to 75 -15 to 1235 -15 to 285 -15 to 36±
3±
75
15±
3±±
75±
15±±
375±
6±±±
psi
3±
6±
75
15±
18±
3±±
375
6±±
75±
15±±
18±±
3±±±
375±
6±±±
75±±
975±
975±
6±
Output Signal and Supply Voltage
Wire system
2-wire
Output
4-2±mA
Supply Voltage
1±-28Vdc
Connection Pin Nos
+ve Supply Pin 1
-ve Supply Pin 2
Ground Earth Pin
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone +44 (±) 12±2 897969
Email:sales@cynergy3.com
www.cynergy3.com
ISO9001CERTIFIED
IPSUAT 2±16
© 2±16 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.