HS-26CT31RH
®
Data Sheet
August 25, 2008
FN2929.3
Radiation Hardened Quad Differential Line
Driver
Features
• Electronically Screened to SMD #5962-95632
• QML Qualified Per MIL-PRF-38535 Requirements
• 1.2 Micron Radiation Hardened CMOS
• Total Dose Up to 300kRAD(Si)
[ /Title
(HS-
26C31
RH)
The Intersil HS-26CT31RH is a quad differential line driver
designed for digital data transmission over balanced lines
and meets the requirements of EIA standard RS-422.
Radiation hardened CMOS processing assures low power
consumption, high speed, and reliable operation in the most
severe radiation environments.
/Subje
ct
(Radia
tion
Harde
ned
Quad
Differe
ntial
• Latchup Free
• EIA RS-422 Compatible Outputs (Except for IOS)
The HS-26CT31RH accepts TTL signal levels and converts
them to RS-422 compatible outputs. This circuit uses special
outputs that enable the drivers to power down without
loading down the bus. Enable and disable pins allow several
devices to be connected to the same data source and
addressed independently.
• Operation with TTL Based on V = V /2
IH DD
• High Impedance Outputs when Disabled or Powered
Down
• Low Power Dissipation 2.75mW Standby (Max)
• Single 5V Supply
Specifications
• Low Output Impedance 10Ω or Less
• Full -55°C to +125°C Military Temperature Range
Specifications for Rad Hard QML devices are controlled by
the Defense Supply Center in Columbus (DSCC). The SMD
numbers listed here must be used when ordering.
Line
Driver)
/Autho
r ()
/Keyw
ords
Applications
• Line Transmitter for MIL-STD-1553 Serial Data Bus
Detailed Electrical Specifications for these devices are
contained in SMD 5962-95632. A “hot-link” is provided
on our homepage for downloading.
• Line Transmitter for RS422
www.intersil.com/military/
(Inters
il
Corpo
ration,
semic
onduc
tor,
Radiat
ion
Harde
ned,
RH,
Rad
Hard,
QML,
Satellit
e,
Ordering Information
ORDERING
NUMBER
INTERNAL
MKT. NUMBER
TEMP. RANGE
(°C)
PKG.
DWG. #
PART MARKING
Q 5962F95 63201QEC
Q 5962F95 63201QXC
Q 5962F95 63201VEC
Q 5962F95 63201VXC
HS1 - 26CT31RH/PROTO
HS9 - 26CT31RH/PROTO
PACKAGE
16 LD SBDIP
5962F9563201QEC
5962F9563201QXC
5962F9563201VEC
5962F9563201VXC
HS1-26CT31RH/PROTO
HS9-26CT31RH/PROTO
5962F9563201V9A
HS1-26CT31RH-8
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
D16.3
HS9-26CT31RH-8
16 LD FLATPACK
16 LD SBDIP
K16.A
D16.3
K16.A
D16.3
K16.A
HS1-26CT31RH-Q
HS9-26CT31RH-Q
HS1-26CT31RH/PROTO
HS9-26CT31RH/PROTO
HS0-26CT31RH-Q
16 LD FLATPACK
16 LD SBDIP
16 LD FLATPACK
SMD,
Class
V,
Data
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2000, 2008. All Rights Reserved
1
Satellite Applications Flow™ (SAF) is a trademark of Intersil Corporation. All other trademarks mentioned are the property of their