INA3221
www.ti.com
SBOS576 –MAY 2012
Triple-Channel, High-Side Measurement, Shunt and Bus Voltage Monitor
with I2C™ Interface
Check for Samples: INA3221
1
FEATURES
DESCRIPTION
The INA3221 is a three-channel, high-side current
and bus voltage monitor with an I2C interface. The
INA3221 monitors both shunt voltage drops and bus
supply voltages in addition to having programmable
conversion times and averaging modes for these
signals. The INA3221 offers both critical and warning
alerts to detect multiple programmable out-of-range
conditions for each channel.
23
•
Senses Bus Voltages From 0 V to +26 V
Reports Shunt and Bus Voltage
High Accuracy:
•
•
–
–
Offset Voltage: ±80 µV (max)
Gain Error: 0.25% (max)
•
•
•
•
Configurable Averaging Options
Four Programmable Addresses
The INA3221 senses current on buses that can vary
from 0 V to +26 V. The device is powered from a
single +2.7-V to +5.5-V supply and draws 350 μA
(typ) of supply current. The INA3221 is specified over
the operating temperature range of –40°C to +125°C.
The I2C interface features four programmable
addresses.
Power-Supply Operation: 2.7 V to 5.5 V
Programmable Alert and Warning Outputs
APPLICATIONS
•
•
•
•
•
•
Computers
Power Management
Telecom Equipment
Battery Chargers
Power Supplies
Test Equipment
RELATED PRODUCTS
DESCRIPTION
DEVICE
High- or low-side, bi-directional current and
power monitor with two-wire interface
INA226
Zero-drift, bi-directional current power monitor
with two-wire interface
INA219
INA209
Current and power monitor with watchdog,
peak-hold, and fast comparator functions
Zero-drift, low-cost, analog current-shunt
monitor series in small package
INA210, INA211, INA212,
INA213, INA214
Power
Supply
(0V to 26V)
CBYPASS
0.1µF
Load 1
VS (Supply
VIN+1
Voltage)
10kΩ
VIN-
1
Power
Supply
(0V to 26V)
SDA
SCL
CH 1
I2C
Interface
Bus
Voltages 1-3
A0
CH 2
VIN+2
VPU
VS
Shunt
Voltages 1-3
ADC
VIN-2
10kΩ
Critical Limit
Alerts 1-3
VPU
Power Valid
Critical
CH 3
Shunt Voltage
Sum Alerts
Load 2
Warning
Timing Control
GND
VIN+3
VIN-3
Power
Supply
(0V to 26V)
Load 3
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
I2C is a trademark of NXP Semiconductors.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated