Models IMS-5A-ER and IMS-5B-ER
Vishay Dale
Inductors
Military/Established Reliability, MIL-C-39010 Qualified
M39010/01/02, Magnetic Shield
FEATURES
• MIL-C-39010/01 (phenolic core - iron sleeve).
• MIL-C-39010/02 (iron core - iron sleeve).
ELECTRICAL SPECIFICATIONS
DENSITY SPECIFICATIONS
Inductance Tolerance: ± 5%, ± 10%.
Weight: 1 gram maximum.
Dielectric Strength: 1000V RMS at sea level.
Operating Temperature: - 55°C to + 105°C.
Self-Resonant Frequency: Measured per MIL-C-39010.
Q: Measured on a Q-Meter.
Shielding: At the coupling test frequency two units
assembled side by side exhibit less than 3% coupling.
ENVIRONMENTAL SPECIFICATIONS
Moisture: Meets requirements of MIL-C-39010.
Vibration: High frequency, 10Hz to 2000Hz @ 20 G
± 10% maximum for 12 logarithmic swings each of
20 minute duration repeated for each of three mutually
perpendicular planes.
Maximum Current: Based on temperature rise not to
exceed 15°C at + 90°C ambient.
MECHANICAL SPECIFICATIONS
Terminal Strength: Meets 5 pound pull test; three 360°
Shock: 100 G, 6 MS.
rotations in alternate directions.
DIMENSIONAL CONFIGURATIONS [Numbers in brackets indicate millimeters]
.162 ± .010
[4.11 ± .254]
1.438 ± .188
[36.52 ± 4.78]
.410 ± .020
[10.41 ± .508]
#22 .025 ± .002
[.635 ± .051] TCW
STANDARD ELECTRICAL SPECIFICATIONS
TEST
FREQ.
(MHz)
SELF-RESONANT
FREQ. MIN.
(MHz)
DCR
MAX.
(Ohms)
RATED DC
CURRENT
(mA)
INCREMENTAL
CURRENT
(mA)
MIL-C-39010
TYPE
DASH †
NUMBER
IND.
(µH)
Q
MIN.
MODEL
TOL.
—
—
—
—
—
—
—
—
—
—
—
—
M39010/01
M39010/01
M39010/01
M39010/01
M39010/01
M39010/01
M39010/01
M39010/01
M39010/01
M39010/01
M39010/01
M39010/01
AR10**
AR11**
AR12**
AR13**
AR15**
AR16**
AR18**
AR20**
AR22**
AR24**
AR27**
AR30**
.10
.11
.12
.13
.15
.16
.18
.20
.22
.24
.27
.30
± 5%, ± 10%
± 5%
50
50
50
50
50
50
50
49
49
47
47
46
25
25
25
25
25
25
25
25
25
25
25
25
250
250
250
250
250
250
250
250
250
250
250
250
.025
.034
.034
.037
.037
.047
.047
.067
.067
.11
1790
1530
1530
1470
1470
1300
1300
1100
1100
853
IMS-5A-ER
IMS-5A-ER
IMS-5A-ER
IMS-5A-ER
IMS-5A-ER
IMS-5A-ER
IMS-5A-ER
IMS-5A-ER
IMS-5A-ER
IMS-5A-ER
IMS-5A-ER
IMS-5A-ER
± 5%, ± 10%
± 5%
± 5%, ± 10%
± 5%
± 5%, ± 10%
± 5%
± 5%, ± 10%
± 5%
± 5%, ± 10%
± 5%
.11
853
.13
780
† The complete Dash Number will include two additional letters (indicated by **). The first additional letter (J = 5%, K = 10%, L = 20%) will
indicate the inductance tolerance and the second additional letter will indicate the failure rate symbol (e.g., M, P, R, S) and will be added to the
NOTE: Listing of Military Standard does not imply qualification. Contact factory for latest government QPL information.
Document Number 34049
Revision 30-Apr-99
www.vishay.com
107