Embedded Power for
Business-Critical Continuity
TM
Rev. 1.30.06
iMP Series
1 of 8
Intelligent MP
Series
Up to 1500 Watts
RoHS
Total Power: Up to 1500 Watts
Input Voltage: 85 - 264 VAC
120-300 VDC
# of Outputs: Up to 21
Electrical Specifications
Input
Special Features
Input range
85-264 VAC: 120-350 VDC
(Limited to 300VDC in medical applications)
• Full Medical EN60601 Approval
• Intelligent I2C Control
Frequency
47-440 Hz
Inrush current
Efficiency
40A peak max. (soft start)
up to 85% @ full case load
0.99 typ. meets EN61000-3-2
• Configurable Current Share
on all outputs >10A
• Voltage adjustment on all out-
puts (Manual or I2C)
Power Factor
Turn-on time
• Configurable Input and Output
OK signals and indicators
• Configurable Inhibit/Enable
AC on 1.5 sec typ., Inhibit / Enable 150 ms typ.
Programmable
• Configurable Output
UP/DOWN sequencing
• Intelligent fan
(speed control/fault status)
• Customer Provided Air Option
EMI Filter
CISPR 22 / EN55022 Level “B”
300 μA max. @ 240 VAC; 47-63Hz
CISPR 22 / EN55022 Level “B”
Leakage current
Radiated EMI
Holdover storage
20 ms minimum (independent of input VAC) additional
34mSEC holdover storage with optional HUP module
(Semi F47 compatible)
• uP Controlled PFC input with
active Inrush protection
• I2C monitor of Voltage,
Current, and Temp
AC OK
>5 ms early warning min. before outputs lose regulation.
Programmable. Full cycle ride thru (50 Hz)
• IPMI Compliant
• Programmable Voltage, Current
Harmonic distortion
Isolation
Meets EN61000-3-2
Limit, Inhibit/Enable through I2C
Meets EN60950 and EN60601
• Optional Extended Hold-up
Module
(Semi F47 compliance)
• Power density increased by 50%
Global Inhibit/Enable TTL, Logic “1” and Logic “0”. Configurable.
Input fuse (internal)
Warranty
iMP4: 10A; iMP8: 20A; iMP1: 20A (both lines fused)
2 years
• Backward compatibility with
standard MP
• External switching frequency
sync input
• Optional Conformal Coating
• Industrial Temp Range
• No preload required