MEMS Oscillator, Low Power, LVCMOS, 115.000 MHz to 137.000 MHz
IM802 Series
Features:
Typical Applications:
MEMS Technology
Direct pin to pin drop-in replacement for industry-standard packages
LVCMOS Compatible Output
Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0 mm x mm
Six supply voltages options, +1.8 V, +2.5 V, +2.8 V, +3.3 V and +2.25 V to +3.63 V continuous
Pb-free, Halogen-free, Antimony-free
Fibre Channel
Server and Storage
GPON, EPON
100M / 1G /10G Ethernet
RoHS and REACH compliant
Fast delivery times
Electrical Specifications:
Frequency Range
115.000 MHz to 137.000MHz
See Part Number Guide
Inclusive of Initial Tolerance, Operating Temperature Range, Load,
Voltage, and Aging (First year at +25ºC)
Frequency Stability
Operating Temperature
See Part Number Guide
See Part Number Guide
Supply Voltage (Vdd) ±10%
6.2 mA typ./ 7.5 mA max
5.5 mA typ./ 6.4 mA max
4.9 mA typ./ 5.6 mA max
No load condition, F = 125 MHz, Vdd = +2.8V, +3.0V, = +3.3 V
No load condition, F = 125 MHz, Vdd = +2.5 V
No load condition, F = 125 MHz, Vdd = +1.8 V
Current Consumption
OE Disable Current
Standby Current
4.2 mA max
4.0 mA max
Vdd = +2.5 V to +3.3 V, OE = GND, Output in high-Z state
Vdd = +1.8 V, OE = GND, Output in high-Z state
ꢀꢀꢀ
ST = GND, Vdd = +2.8 V to +3.3V
2.6 µA typ./ 4.3 µA max
1.4 µA typ./ 2.5 µA max
0.6 µA typ./1.3 µA max
ꢀꢀꢀ
ST = GND, Vdd = +2.5 V
ꢀꢀꢀ
ST = GND, Vdd = +1.8 V
Waveform Output
LVCMOS / HCMOS
45%/55%
Symmetry (50% of waveform)
All supply voltages
1.0 nSec typ./ 2.0 nSec max
1.3 nSec typ./ 2.5 nSec max
Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V from 20% to 80% of waveform
Vdd = +1.8 V from 20% to 80% of waveform
Rise / Fall Time
Logic “1”
90% of Vdd min
10% of Vdd max
70% of Vdd max
30% of Vdd min
Logic “0”
ꢀꢀꢀ
Input Characteristics
Input High Voltage
Pin 1, OE or ST
ꢀꢀꢀ
Pin 1, OE or ST
ꢀꢀꢀ
50kΩ min / 87kΩ typ. 150kΩ max
2.0MΩ min
Pin 1, OE logic high or logic or ST logic high
Pin 1, ST logic Low
Input Pull-up Impedance
ꢀꢀꢀ
Startup Time
5 mSec max
122 nSec max
5 mSec max
Measured from the time Vdd reaches its rated minimum value
F=137 MHz For other frequencies Toe = 100 nSec + 3 cycles
Enable Disable Time
Resume Time
ꢀꢀꢀ
Measured from the time ST pin crosses 50% threshold
1.9 pSec typ,/ 3.0 pSec max
1.8 pSec typ./ 4.0 pSec max
F= 125 MHz, Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V
F = 125 MHz, Vdd = +1.8 V
RMS Period Jitter
12.0 pSec typ./ 25.0 pSec max
14.0 pSec typ./ 30.0 pSec max
F = 125 MHz, Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V
F = 125 MHz, Vdd = +1.8 V
Peak-to-peak Period Jitter
0.5 pSec typ./ 0.9 pSec max
1.3 pSec typ./ 2.0 pSec max
Integration Bandwidth = 900 kHz to 7.5 MHz
Integration Bandwidth = 12 kHz to 20.0 MHz
RMS Phase Jitter (random)
Notes:
1. All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated.
2. Typical values are at +25ºC and nominal supply voltage.
3333
Absolute Maximum Limits
Storage Temperature
Supply Voltage (Vdd)
Electrostatic Discharge
-65ºC to +150ºC
-0.5 VDC to 4.0 VDC
2000 V max
Solder Temperature (follow standard Pb free soldering guidelines)
Junction Temperature
260ºC max
150ºC max
Rev: 08/18/17_B
Page 1 of 9
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice