MEMS Oscillator, Low Power, LVCMOS/HCMOS Compatible, 1.000 MHz to 110.000 MHz
IM801 Series
Features:
Typical Applications:
MEMS Technology
Direct pin to pin drop-in replacement for industry-standard packages
LVCMOS/HCMOS Compatible Output
Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2 mm x mm
Pb-free, Halogen-free, Antimony-free
RoHS and REACH compliant
Fibre Channel
Server and Storage
GPON, EPON
100M / 1G /10G Ethernet
Fast delivery times
Electrical Specifications:
Frequency Range
1.000 MHz to 110.000MHz
Inclusive of Initial Tolerance, Operating Temperature Range, Load,
Voltage, and Aging
Frequency Stability
See Part Number Guide
Operating Temperature
See Part Number Guide
See Part Number Guide
Supply Voltage (Vdd) 10%
3.8 mA typ./ 4.5 mA max
3.7 mA typ./ 4.2 mA max
3.5 mA typ./ 4.1 mA max
No load condition, F = 20 MHz, Vdd = +2.8 V to +3.3 V
No load condition, F = 20 MHz, Vdd = +2.5 V
No load condition, F = 20 MHz, Vdd = +1.8 V
Current Consumption
OE Disable Current
Standby Current
4.2 mA max
4.0 mA max
Vdd = +2.5 V to +3.3 V, OE = GND, Output in high-Z state
Vdd = +1.8 V, OE = GND, Output in high-Z state
ꢀꢀꢀ
2.1 µA typ./ 4.3 µA max
1.1 µA typ. / 2.5 µA max
0.2 µA typ. / 1.3 µA max
ST = GND, Vdd = +2.8 V to +3.3V
ꢀꢀꢀ
ST = GND, Vdd = +2.5 V
ꢀꢀꢀ
ST = GND, Vdd = +1.8 V
Waveform Output
Symmetry
LVCMOS / HCMOS
45%/55%
50% of waveform all Vdds
1.0 nSec typ./ 2.0 nSec max
1.3 nSec typ./ 2.5 nSec max
Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V from 20% to 80% of waveform
Vdd = +1.8 V from 20% to 80% of waveform
Rise / Fall Time
Logic “1”
90% of Vdd min
10% of Vdd max
70% of Vdd min
30% of Vdd max
Logic “0”
ꢀꢀꢀ
Input High Voltage
Input Low Voltage
Pin 1, OE or ST
ꢀꢀꢀ
Pin 1, OE or ST
ꢀꢀꢀ
50kΩ min / 87kΩ typ. 150kΩ max
2.0MΩ min
Pin 1, OE logic high or logic low or ST logic high
Pin 1, ST logic Low
Input Pull-up Impedance
ꢀꢀꢀ
Startup Time
5.0 mSec max
130 nSec max
5.0 mSec max
Measured from the time Vdd reaches its rated min value
Enable/Disable time
Resume Time
F = 110 Mhz. For other frequencies, T_oe =100 nSec = 3 cycles
ꢀꢀꢀ
Measured from the time ST pin crosses 50% threshold
1.8pSec typ./ 3.0pSec max
1.8pSec typ./ 3.0pSec max.
F = 75 MHz, Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V
F = 75 MHz, Vdd = +1.8 V
RMS Period Jitter
12.0 pSec typ./ 25.0 pSec max
14.0 pSec typ./ 30.0 pSec max
F = 75 MHz, Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V
F = 75 MHz, Vdd = +1.8 V
Peak-to-peak Period Jitter
0.5pSec typ./ 0.9 pSec max
1.3pSec typ./ 2.0pSec max
F = 75 MHz, Integration Bandwidth = 900 kHz to 7.5 MHz
F = 75 MHz, Integration Bandwidth = 12 kHz to 20.0 MHz
RMS Phase Jitter (random)
Notes:
All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated.
Typical values are at +25ºC and nominal supply voltage.
Absolute Maximum Limits
Storage Temperature
Supply Voltage (Vdd)
Electrostatic Discharge
-65ºC to +150ºC
-0.5 VDC to 4.0 VDC
2000 V max
Solder Temperature (follow standard Pb free soldering guidelines)
Junction Temperature
260ºC max
150ºC max
Rev: 01/30/16_A
Page 1 of 9
ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●
www.ilsiamerica.com
Specifications subject to change without notice