IHXL-1500VZ-5A
www.vishay.com
Vishay Dale
High Current Through-Hole Inductor, High Temperature
FEATURES
• High temperature, up to 155 °C
• Shielded construction
• Frequency range up to 5.0 MHz
• Handles high transient current spikes without
saturation
• Ultra low buzz noise, due to composite
construction
• AEC-Q200 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive high current filters
• Switching regulators
• In-line noise filters
• Differential mode choke
• Boost power factor correction choke
• 12 V, 24 V, 48 V DC/DC converters
• High current battery charging
STANDARD ELECTRICAL SPECIFICATIONS
L0 INDUCTANCE
ꢀ0 % AT 500 kHz,
ꢀ V, 0 A
DCR
TYP.
ꢀ5 °C
(mΩ)
DCR
MAX.
ꢀ5 °C
(mΩ)
HEAT RATING
CURRENT
DC TYP.
HEAT RATING
CURRENT
DC TYP.
SATURATION
CURRENT
DC TYP.
SATURATION
CURRENT
DC TYP.
(μH)
(A) (3)
(A) (4)
(A) (5)
(A) (6)
0.68
0.82
1.5
0.12
0.17
0.25
0.32
0.40
0.13
0.18
0.26
0.34
0.42
154
132
120
115
96
235
196
178
168
150
301
235
138
104
87
420
332
193
150
124
2.2
3.3
Notes
(1)
(2)
(3)
(4)
(5)
(6)
(7)
All test data is referenced to 25 °C ambient
Operating temperature range -55 °C to +155 °C
DC current (A) that will cause an approximate ΔT of 40 °C after one hour
DC current (A) that will cause an approximate ΔT of 100 °C after one hour
DC current (A) that will cause L0 to drop approximately 20 %
DC current (A) that will cause L0 to drop approximately 30 %
The part temperature (ambient + temp. rise) should not exceed 155 °C under worst case operating conditions. Circuit design, component
placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be
verified in the end application
Revision: 08-Oct-2020
Document Number: 34568
1
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000