IHXL-1100OZ-3A
www.vishay.com
Vishay Dale
High Current Through-Hole Inductor, High Temperature
FEATURES
• High temperature rating, up to 155 °C
• 10 % inductance tolerance
• Magnetically shielded construction
• Frequency range up to 5.0 MHz
• Handles high transient current spikes without
saturation
• AEC-Q200 qualified
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive high current filters
• Switching regulators
• In-line noise filters
• Differential mode choke
• Boost power factor correction choke
• 12 V, 24 V, 48 V DC/DC converters
• High current battery charging
STANDARD ELECTRICAL SPECIFICATIONS
HEAT RATING CURRENT
SATURATION CURRENT
L0 INDUCTANCE
DCR DCR
DC TYP.
(A)
DC TYP.
(A)
10 ꢀ AT 100 kHz, TYP. MAX.
SRF
TYP.
0.25 V, 0 A
(μH)
25 °C 25 °C
PART NUMBER
(mΩ) (mΩ) 40 °C RISE (1) 80 °C RISE (2) 20 ꢀ DROP (3) 30 ꢀ DROP (4) (MHz)
IHXL1100OZEB1R0K3A
IHXL1100OZEB2R2K3A
IHXL1100OZEB3R3K3A
IHXL1100OZEB4R7K3A
IHXL1100OZEB100K3A
1.0
2.2
0.28
0.47
0.70
0.92
2.35
0.31
0.52
0.77
1.01
2.59
138
79
76
65
191
118
103
88
102
80
60
49
149
114
86
29
19
15
11
7
3.3
4.7
70
10.0
41
55
35
51
Notes
•
•
•
All test data is referenced to 25 °C ambient
Operating temperature range -55 °C to +155 °C
The part temperature (ambient + temp. rise) should not exceed 155 °C under worst case operating conditions. Circuit design, component
placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be
verified in the end application
(1)
(2)
(3)
(4)
DC current (A) that will cause an approximate ΔT of +40 °C
DC current (A) that will cause an approximate ΔT of +80 °C
DC current (A) that will cause L0 to drop approximately 20 %
DC current (A) that will cause L0 to drop approximately 30 %
Revision: 24-Feb-2023
Document Number: 34601
1
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000